MEASUREMENT OF SOLID SLURRY FLOW VIA CORRELATION OF ELECTROMAGNETIC FLOW METER, ELECTRICAL RESISTANCE TOMOGRAPHY AND MECHANISTIC MODELLING

CORC > 力学研究所 > 中国科学院力学研究所 > 水动力学与海洋工程重点实验室(2009-2011)

	MEASUREMENT OF SOLID SLURRY FLOW VIA CORRELATION OF ELECTROMAGNETIC FLOW METER, ELECTRICAL RESISTANCE TOMOGRAPHY AND MECHANISTIC MODELLING
	Xu JY(许晶禹); Wu YX(吴应湘); Zheng ZC(郑之初); Wang M; Munir B; Oluwadarey HI; Schlaberg HI; Williams RA; Xu JY
刊名	Journal of Hydrodynamics
	2009
通讯作者邮箱	xujingyu@imech.ac.cn
卷号	21 期号:4 页码:557-563
关键词	Slurry Measurement Electrical Resistance Tomography (Ert) Electromagnetic Flow Meters (Efm) In-Situ Mean Volumetric Fraction Slip Velocity
ISSN号	1001-6058
通讯作者	Xu JY
合作状况	国际
中文摘要	The study presented here was carried out to obtain the actual solids flow rate by the combination of electrical resistance tomography and electromagnetic flow meter. A new in-situ measurement method based on measurements of the Electromagnetic Flow Meters (EFM) and Electrical Resistance Tomography (ERT) to study the flow rates of individual phases in a vertical flow was proposed. The study was based on laboratory experiments that were carried out with a 50 mm vertical flow rig for a number of sand concentrations and different mixture velocities. A range of sand slurries with median particle size from 212 mu m to 355 mu m was tested. The solid concentration by volume covered was 5% and 15%, and the corresponding density of 5% was 1078 kg/m(3) and of 15% was 1238 kg/m(3). The flow velocity was between 1.5 m/s and 3.0 m/s. A total of 6 experimental tests were conducted. The equivalent liquid model was adopted to validate in-situ volumetric solids fraction and calculate the slip velocity. The results show that the ERT technique can be used in conjunction with an electromagnetic flow meter as a way of measurement of slurry flow rate in a vertical pipe flow. However it should be emphasized that the EFM results must be treated with reservation when the flow pattern at the EFM mounting position is a non-homogenous flow. The flow rate obtained by the EFM should be corrected considering the slip velocity and the flow pattern.
类目[WOS]	Mechanics
研究领域[WOS]	Mechanics
收录类别	SCI
资助信息	Royal Society [15933]
语种	英语
WOS记录号	WOS:000270869100016
公开日期	2009-08-03 ; 2010-06-03
内容类型	期刊论文
源URL	[http://dspace.imech.ac.cn/handle/311007/33579]
专题	力学研究所_水动力学与海洋工程重点实验室(2009-2011)
通讯作者	Xu JY
推荐引用方式 GB/T 7714	Xu JY,Wu YX,Zheng ZC,et al. MEASUREMENT OF SOLID SLURRY FLOW VIA CORRELATION OF ELECTROMAGNETIC FLOW METER, ELECTRICAL RESISTANCE TOMOGRAPHY AND MECHANISTIC MODELLING[J]. Journal of Hydrodynamics,2009,21(4):557-563.
APA	许晶禹.,吴应湘.,郑之初.,Wang M.,Munir B.,...&Xu JY.(2009).MEASUREMENT OF SOLID SLURRY FLOW VIA CORRELATION OF ELECTROMAGNETIC FLOW METER, ELECTRICAL RESISTANCE TOMOGRAPHY AND MECHANISTIC MODELLING.Journal of Hydrodynamics,21(4),557-563.
MLA	许晶禹,et al."MEASUREMENT OF SOLID SLURRY FLOW VIA CORRELATION OF ELECTROMAGNETIC FLOW METER, ELECTRICAL RESISTANCE TOMOGRAPHY AND MECHANISTIC MODELLING".Journal of Hydrodynamics 21.4(2009):557-563.