Study on the residual stresses of Ti(C,N)-coated WC cutting tools by pulsed high energy density plasma gun | |
Peng, ZJ ; Miao, HZ ; Yang, SZ ; Liu, CZ ; Qi, LH ; Pan, W | |
刊名 | RARE METAL MATERIALS AND ENGINEERING
![]() |
2003 | |
卷号 | 32页码:260 |
关键词 | SPRAYED COATINGS HARD |
ISSN号 | 1002-185X |
通讯作者 | Peng, ZJ (reprint author), Tsing Hua Univ, Dept Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China. |
中文摘要 | TiCN coatings were deposited onto WC cutting tools at ambient temperatures using pulsed high energy density plasma coaxial gun. The residual stresses of the as-coated tools were determined by the X-ray diffraction (XRD) method. The results showed that the residual stresses were originated from three sources: compressive stress induced in substrates by ion implantation of pulsed plasma, tensile stresses induced in coatings during the fast cooling of plasma from the ultra-high temperature to the ambient temperature of the substrate it reached at, and the secondary cooling stresses induced in coatings due to the thermal expansion mismatch during the cooling from the average temperature reached by the coating-substrate system after deposition to room temperature. The residual stresses obtained were in a range of -0.5 GPa to +1.0 GPa, and the low stress state showed that the coatings were well adhesive to the substrate. It was discovered that the residual stresses varied with the processing conditions. With the increases in the discharging voltages between the inner and outer electrodes of the coaxial gun, and the shot times of pulsed plasma, the compressive stresses decreased and the tensile stresses increased. And there is a peak value in the residual tensile stresses. |
收录类别 | SCI |
语种 | 中文 |
公开日期 | 2013-09-24 |
内容类型 | 期刊论文 |
源URL | [http://ir.iphy.ac.cn/handle/311004/53871] ![]() |
专题 | 物理研究所_物理所公开发表论文_物理所公开发表论文_期刊论文 |
推荐引用方式 GB/T 7714 | Peng, ZJ,Miao, HZ,Yang, SZ,et al. Study on the residual stresses of Ti(C,N)-coated WC cutting tools by pulsed high energy density plasma gun[J]. RARE METAL MATERIALS AND ENGINEERING,2003,32:260. |
APA | Peng, ZJ,Miao, HZ,Yang, SZ,Liu, CZ,Qi, LH,&Pan, W.(2003).Study on the residual stresses of Ti(C,N)-coated WC cutting tools by pulsed high energy density plasma gun.RARE METAL MATERIALS AND ENGINEERING,32,260. |
MLA | Peng, ZJ,et al."Study on the residual stresses of Ti(C,N)-coated WC cutting tools by pulsed high energy density plasma gun".RARE METAL MATERIALS AND ENGINEERING 32(2003):260. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论