Influence of dressing parameters on surface roughness of workpiece for grinding hardened 9XC tool steel

doi:10.1088/1757-899X/542/1/012008

CORC > 兰州理工大学 > 兰州理工大学 > 机电工程学院

	Influence of dressing parameters on surface roughness of workpiece for grinding hardened 9XC tool steel
	Xuan Tu, Hoang 2,3; Thao, Le Phuong 2; Thi Hong, Tran 4; Thi Thanh Nga, Nguyen 2; Trung, Do Duc 5; Gong, Jun 1,3; Pi, Vu Ngoc 2
	2019-07-05
会议日期	December 21, 2018 - December 22, 2018
会议地点	Xiamen, China
关键词	Grinding (machining) Hardening Tool steel Depth of cut Dressing parameters Experimental system Grinding process Machining surfaces Optimal values Surface smoothness Workpiece
卷号	542
期号	1
DOI	10.1088/1757-899X/542/1/012008
英文摘要	The quality of final machining surfaces in a grinding process, such as the surface roughness and the accuracy depends on the grinding and dressing parameters. In order to improve the surface smoothness and precise tolerances, many grinding and dressing parameters need to be optimized. However, several dressing parameters, i.e., the rough dressing, the final dressing, and the dressing without depth of cut affected on the surface roughness have not yet been mentioned in the grinding process. This paper presents an optimization of these parameters on the surface roughness for grinding the hardened 9XC steel using grinding wheel Cn80MV1 400x40x203. An experimental system was set up to evaluate those parameters. The optimal values of these parameters were determined by using Minitab® 16 for analyzing data from the experiment. © Published under licence by IOP Publishing Ltd.
会议录	IOP Conference Series: Materials Science and Engineering
会议录出版者	Institute of Physics Publishing
语种	英语
ISSN号	17578981
内容类型	会议论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/118161]
专题	机电工程学院
作者单位	1.Key Laboratory of Digital Manufacturing Technology and Application, Ministry of Education of China, Lanzhou; 730050, China 2.Thai Nguyen University of Technology, Thai Nguyen City, Viet Nam; 3.School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou; 730050, China; 4.Nguyen Tat Thanh University, Ho Chi Minh city, Viet Nam; 5.Hanoi University of Industry, Viet Nam;
推荐引用方式 GB/T 7714	Xuan Tu, Hoang,Thao, Le Phuong,Thi Hong, Tran,et al. Influence of dressing parameters on surface roughness of workpiece for grinding hardened 9XC tool steel[C]. 见:. Xiamen, China. December 21, 2018 - December 22, 2018.