Structural dynamic analysis and optimization of high-speed precision machining center column

doi:10.4028/www.scientific.net/AMR.655-657.48

CORC > 兰州理工大学 > 兰州理工大学 > 机电工程学院

	Structural dynamic analysis and optimization of high-speed precision machining center column
	Wang, Fuqiang; Rui, Zhiyuan; Zhao, Dongping; Lei, Chunli
	2013
会议日期	December 22, 2012 - December 23, 2012
会议地点	Beihai, China
关键词	Columns (structural) Finite element method Industrial engineering Machining centers Mechanisms Optimization Precision engineering Production engineering Site selection Dynamic performance Optimization scheme Precision machining centers Structural dynamic optimizations Structure optimization Thickness of walls Variation analysis
卷号	655-657
DOI	10.4028/www.scientific.net/AMR.655-657.48
页码	48-51
英文摘要	The theory of structural dynamic analysis is put forward firstly. Then the dynamic performance of HMC80 high-speed precision machining center column is analyzed by means of finite element method. The dynamic performance of the column is analyzed using structural dynamic optimization theory and variation analysis with the thickness of wall plate and the inner rib plates as the parameters thirdly. Based on the analysis results, the structure optimization scheme of the column is obtained. The structure optimization scheme is analyzed and the analysis results show that the dynamic performance of the column optimization scheme is improved obviously. © (2013) Trans Tech Publications, Switzerland.
会议录	Advanced Materials Research
会议录出版者	Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
语种	英语
ISSN号	10226680
内容类型	会议论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/117618]
专题	机电工程学院
作者单位	School of Mechanical and Electronical Engineering, Lanzhou University of Technology, Lanzhou, 730050, China
推荐引用方式 GB/T 7714	Wang, Fuqiang,Rui, Zhiyuan,Zhao, Dongping,et al. Structural dynamic analysis and optimization of high-speed precision machining center column[C]. 见:. Beihai, China. December 22, 2012 - December 23, 2012.