Optimize CNC milling parameters on-line

doi:10.1109/ICMTMA.2010.79

CORC > 兰州理工大学 > 兰州理工大学 > 机电工程学院

	Optimize CNC milling parameters on-line
	Yao, Yunping; Li, Ying; Chen, Qi; Wang, Sumei
	2010
会议日期	March 13, 2010 - March 14, 2010
会议地点	Changsha, China
关键词	Efficiency CNC milling CNC milling machine Control technologies Limited companies Milling parameters Online optimization Optimal function Optimil-XL
卷号	2
DOI	10.1109/ICMTMA.2010.79
页码	856-859
英文摘要	At present, in order to solve the low efficiency and high cost problem in the process of CNC milling, using OptiMil-XL to control the CNC milling machine parameters, which manufactures at Control Technology Limited Company in Israel, it monitors the actual milling parameters and makes feed-rate automatically adjust to the most appropriate parameters. It also gives an alarm when the actual load reaches overload limits or surpasses the limits. Comparing with the traditional method and this one, traditional method doesn't optimize the parameters in practice but just in theory, it is proved that this way improves processing efficiency and reduces cost. © 2010 IEEE.
会议录	2010 International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2010
会议录出版者	IEEE Computer Society
语种	英语
内容类型	会议论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/116150]
专题	机电工程学院
作者单位	Lanzhou University of Technology, Lanzhou, Gansu, 730050, China
推荐引用方式 GB/T 7714	Yao, Yunping,Li, Ying,Chen, Qi,et al. Optimize CNC milling parameters on-line[C]. 见:. Changsha, China. March 13, 2010 - March 14, 2010.