The Solid Modeling and Simulation for Non-circular Gear Based on Pro/E

doi:10.4028/www.scientific.net/AMR.230-232.506

CORC > 兰州理工大学 > 兰州理工大学 > 机电工程学院

	The Solid Modeling and Simulation for Non-circular Gear Based on Pro/E
	Hu, Chibing; Wang, Yazhou; Kong, Deyong; Liu, Yongping
	2011
关键词	Non-circular gear Wire cutting Solid Modeling Simulation
卷号	230-232
DOI	10.4028/www.scientific.net/AMR.230-232.506
页码	506-511
英文摘要	Based on the design theory of non-circular gears, using Pro/E drawing module, a system of elliptical gears parametric module and simulation was developed. Machining non-circular gear by wire cutting can be achieved by using Pro / E manufacturing module, and then gear machining tool path is created, tool and process parameters is set and simulation of process tool and process of post-processing analysis was described. Through the above process ultimately to generate post-processing procedures which NC machine tool need and achieve the automatic programming of non-circular gear. Form the application example, it has been observed that the gear created by Pro/E simulated NC programs can correct mesh according to the theory transmission ratio and the effectiveness of the proposed approach.
会议录	FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY, PTS 1-3
会议录出版者	TRANS TECH PUBLICATIONS LTD
会议录出版地	LAUBLSRUTISTR 24, CH-8717 STAFA-ZURICH, SWITZERLAND
语种	英语
WOS研究方向	Engineering
WOS记录号	WOS:000302967400104
内容类型	会议论文
源URL	[http://119.78.100.223/handle/2XXMBERH/37431]
专题	机电工程学院
通讯作者	Hu, Chibing
作者单位	Lanzhou Univ Technol, Sch Mech & Elect Engn, Lanzhou, Peoples R China
推荐引用方式 GB/T 7714	Hu, Chibing,Wang, Yazhou,Kong, Deyong,et al. The Solid Modeling and Simulation for Non-circular Gear Based on Pro/E[C]. 见:.