Microstructural evaluation and mechanical properties of 7075 aluminum alloy prepared by controlled diffusion solidification | |
Yang, Xiong1; Li, Yuan-dong1; Luo, Xiao-mei1; Zhou, Hong-wei1,2; Cai, Qi-yong1; Li, Ming1; Ma, Ying1,2 | |
刊名 | CHINA FOUNDRY
![]() |
2019-07-01 | |
卷号 | 16期号:4页码:238-247 |
关键词 | primary alpha-Al phase eutectic phase solute atoms tensile strength elongation |
ISSN号 | 1672-6421 |
DOI | 10.1007/s41230-019-9059-9 |
英文摘要 | In the present work, 7075 aluminum alloy (Al-Zn-Mg-Cu) was produced by both conventional casting (CC) and controlled diffusion solidification (CDS) methods. Each sample was subjected to different heat-treatment conditions: as-cast, T4, and T6; and their microstructural and mechanical properties were investigated by optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffractometry (XRD). It was found that CDS promoted the formation of non-dendritic primary alpha-Al phase and reduced shrinkage porosity, thus resulting in improved mechanical properties. In addition, the eutectic phase of the CDS samples mainly consisted of T(Al-ZnMg-Cu) phase, which manifested a well-developed lamellar eutectic structure. However, in the CC samples, the T(Al-Zn-Mg-Cu) phase was composed of rod-like eutectics. Moreover, the theta(Al2Cu) eutectic contents in the CC samples were greater than those in the CDS samples. Each element in the CC samples had an obvious change in the grain boundary, whereas the change in element content in the CDS samples was gradual. Therefore, the non-dendritic morphology of the primary phase and the presence of rod-like eutectics in the matrix of the CDS samples led to enhanced tensile strength and elongation under different heat treatment conditions. |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | SPRINGER SINGAPORE PTE LTD |
WOS记录号 | WOS:000478033800003 |
内容类型 | 期刊论文 |
源URL | [http://ir.lut.edu.cn/handle/2XXMBERH/155338] ![]() |
专题 | 材料科学与工程学院 |
作者单位 | 1.Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Gansu, Peoples R China; 2.Lanzhou Univ Technol, Minist Educ, Key Lab Nonferrous Met Alloys & Proc, Lanzhou 730050, Gansu, Peoples R China |
推荐引用方式 GB/T 7714 | Yang, Xiong,Li, Yuan-dong,Luo, Xiao-mei,et al. Microstructural evaluation and mechanical properties of 7075 aluminum alloy prepared by controlled diffusion solidification[J]. CHINA FOUNDRY,2019,16(4):238-247. |
APA | Yang, Xiong.,Li, Yuan-dong.,Luo, Xiao-mei.,Zhou, Hong-wei.,Cai, Qi-yong.,...&Ma, Ying.(2019).Microstructural evaluation and mechanical properties of 7075 aluminum alloy prepared by controlled diffusion solidification.CHINA FOUNDRY,16(4),238-247. |
MLA | Yang, Xiong,et al."Microstructural evaluation and mechanical properties of 7075 aluminum alloy prepared by controlled diffusion solidification".CHINA FOUNDRY 16.4(2019):238-247. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论