Study on the formation and prevention mechanism of internal voids in cross wedge rolling | |
Jia, Zhi1,2; Wei, Baolin1; Sun, Xuan1 | |
刊名 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
![]() |
2021-08 | |
卷号 | 115期号:11-12页码:3579-3587 |
关键词 | Cross wedge rolling (CWR) Internal voids Numerical simulation Die paraments Connecting rod |
ISSN号 | 0268-3768 |
DOI | 10.1007/s00170-021-07367-x |
英文摘要 | A three-dimensional numerical simulation model of cross wedge rolling (CWR) was developed to analyze the influence law of die parameters on internal voids during CWR using a rigid-plastic finite element method (FEM), where particular attention has been given to the internal void generation mechanism during CWR of shaft parts from the analyses of morphology, stress, and strain. The main reason for the internal voids during CWR is the extremely uneven deformation of the core and surface of the rolled product. By adjusting the key die parameters in CWR, the influence of die process parameters on internal voids in CWR was studied. As a result, the larger the forming and widening angles, the smaller the diameter of the rolled workpiece after rolling, and when the distribution coefficient of area reduction is about 1, the more difficult it is for loose defects to occur. According to the simulation results, a new CWR die structure was proposed and rolling experiments were performed. No looseness was found in the center, which proved that optimizing the die was feasible. |
WOS研究方向 | Automation & Control Systems ; Engineering |
语种 | 英语 |
出版者 | SPRINGER LONDON LTD |
WOS记录号 | WOS:000659025000007 |
内容类型 | 期刊论文 |
源URL | [http://ir.lut.edu.cn/handle/2XXMBERH/148661] ![]() |
专题 | 材料科学与工程学院 |
作者单位 | 1.Lanzhou Univ Technol, Sch Mat Sci & Engn, Lanzhou, Gansu, Peoples R China; 2.Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, 287 Langongping Rd, Lanzhou 730050, Gansu, Peoples R China |
推荐引用方式 GB/T 7714 | Jia, Zhi,Wei, Baolin,Sun, Xuan. Study on the formation and prevention mechanism of internal voids in cross wedge rolling[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2021,115(11-12):3579-3587. |
APA | Jia, Zhi,Wei, Baolin,&Sun, Xuan.(2021).Study on the formation and prevention mechanism of internal voids in cross wedge rolling.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,115(11-12),3579-3587. |
MLA | Jia, Zhi,et al."Study on the formation and prevention mechanism of internal voids in cross wedge rolling".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 115.11-12(2021):3579-3587. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论