Microstructure and mechanical properties of extruded Mg-Y-Zn (Ni) alloys | |
Bi, Guang Li1,2; Wang, Yashuo1,2; Jiang, Jing1,2; Gu, Jiarui1,2; Li, Yuandong1,2; Chen, Tijun1,2; Ma, Ying1,2 | |
刊名 | JOURNAL OF ALLOYS AND COMPOUNDS |
2021-11-10 | |
卷号 | 881 |
关键词 | Extruded Mg-Y-Zn (Ni) alloys LPSO phase Microstructure Mechanical properties |
ISSN号 | 0925-8388 |
DOI | 10.1016/j.jallcom.2021.160577 |
英文摘要 | The microstructure and mechanical properties of extruded Mg-2Y-1Zn (MYZ), Mg-2Y-0.5Zn-0.5Ni (MYZN) and Mg-2Y-1Ni (MYN) (at%) alloys were systematically investigated. Apart from alpha-Mg, Mg2Y, Mg24Y5, along with Yriched phases, there was precipitation of 18R LPSO phase with coarse-lamellar morphology at the dendritic grain boundary of alpha-Mg within the above three as-cast alloys. Parts of 18R LPSO phases transformed into 14H LPSO phases in homogenization. After extrusion, the grain size had obviously refined and the LPSO phase with three types of morphologies existed in three extruded alloys, distribution of lamellar 18R LPSO phase might be detected down the extrusion direction (ED), the blocky 18R LPSO phase as well as the fine strip 14H LPSO phase with some stacking faults in the grain interior. The extruded MYZN alloy exhibited the higher basal texture intensity than extruded MYZ and MYN alloys. Furthermore, we discussed the strengthening mechanisms of the LPSO phase with different morphologies. Tensile test results indicated that the as-extruded MYZN alloy exhibited the highest sigma UTS of 389 MPa, sigma TYS of 336 MPa and epsilon f of 12.6% at room temperature. As for the extruded MYZN alloy, its improved comprehensive mechanical properties were mainly related to the LPSO phase strengthening, texture strengthening, stacking faults strengthening together with grain refinement. (C) 2021 Elsevier B.V. All rights reserved. |
WOS研究方向 | Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | ELSEVIER SCIENCE SA |
WOS记录号 | WOS:000669434000001 |
内容类型 | 期刊论文 |
源URL | [http://ir.lut.edu.cn/handle/2XXMBERH/148595] |
专题 | 材料科学与工程学院 |
作者单位 | 1.Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China; 2.Lanzhou Univ Technol, Sch Mat Sci & Engn, Lanzhou 730050, Peoples R China |
推荐引用方式 GB/T 7714 | Bi, Guang Li,Wang, Yashuo,Jiang, Jing,et al. Microstructure and mechanical properties of extruded Mg-Y-Zn (Ni) alloys[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2021,881. |
APA | Bi, Guang Li.,Wang, Yashuo.,Jiang, Jing.,Gu, Jiarui.,Li, Yuandong.,...&Ma, Ying.(2021).Microstructure and mechanical properties of extruded Mg-Y-Zn (Ni) alloys.JOURNAL OF ALLOYS AND COMPOUNDS,881. |
MLA | Bi, Guang Li,et al."Microstructure and mechanical properties of extruded Mg-Y-Zn (Ni) alloys".JOURNAL OF ALLOYS AND COMPOUNDS 881(2021). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论