Semisolid Die-casting Process of Mg-20Al-0.8Zn Magnesium Alloy | |
Yan Fengyun1; Huang Xiaofeng2; Li Bao3; Ma Ying1 | |
2011 | |
关键词 | magnesium alloy thixo-forming semisolid die-casting isothermal heat treatment mechanical property |
卷号 | 306-307 |
DOI | 10.4028/www.scientific.net/AMR.306-307.539 |
页码 | 539-+ |
英文摘要 | Based on microstructure evolution of Mg-20Al-0.8Zn magnesium alloys realized by semisolid isothermal heat-treatment (SSIT), we obtained the non-dendrite or spherical grains microstructure under the suitable technological parameters that isothermal temperature is 495 degrees C and holding time is 120 min. With the help of special experimental equipment, the semisolid die-casting process has been studied and the specimens have been analyzed. The effects of different parameters as injection speed and pressure on tensile strength, elongation rate, hardness, etc have been investigated. The results indicate that tensile strength was improved along with increasing injection speed and pressure. However, excessive speed will involve gas, which formed defects and reduced the mechanical properties. When the injection pressure is 40MPa and injection speed is 4m/s, the tensile strength and elongation rate can reach maximal 220MPa and 5.63% respectively. Its fracture mechanism was intercrystalline cracking. |
会议录 | EMERGING FOCUS ON ADVANCED MATERIALS, PTS 1 AND 2 |
会议录出版者 | TRANS TECH PUBLICATIONS LTD |
会议录出版地 | KREUZSTRASSE 10, 8635 DURNTEN-ZURICH, SWITZERLAND |
语种 | 英语 |
资助项目 | National Basic Research Program of China[2010CB635106][2007CB613700] ; Gansu Province Key Technology RD Program[0708GKCA029] |
WOS研究方向 | Materials Science |
WOS记录号 | WOS:000309192200111 |
内容类型 | 会议论文 |
源URL | [http://119.78.100.223/handle/2XXMBERH/37548] |
专题 | 材料科学与工程学院 省部共建有色金属先进加工与再利用国家重点实验室 |
通讯作者 | Yan Fengyun |
作者单位 | 1.Lanzhou Univ Technol, State Key Lab Gansu Adv Nonferrous Met Mat, Lanzhou, Peoples R China 2.Lanzhou Univ Technol, Key Lab Nonferrous Met Alloys & Proc, Minist Educ, Lanzhou, Peoples R China 3.Inner Mongolia First Machinery Grp Corp, Baotou, Peoples R China |
推荐引用方式 GB/T 7714 | Yan Fengyun,Huang Xiaofeng,Li Bao,et al. Semisolid Die-casting Process of Mg-20Al-0.8Zn Magnesium Alloy[C]. 见:. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论