Process Modelling of Curing Process-Induced Internal Stress and Deformation of Composite Laminate Structure with Elastic and Viscoelastic Models | |
Li, Dongna1; Li, Xudong1; Dai, Jianfeng2 | |
刊名 | APPLIED COMPOSITE MATERIALS |
2018-06 | |
卷号 | 25期号:3页码:527-544 |
关键词 | Three-dimensional finite element analysis Thermosetting composite Residual stress Curing Shrinkage Deformation |
ISSN号 | 0929-189X |
DOI | 10.1007/s10443-017-9633-5 |
英文摘要 | In this paper, two kinds of transient models, the viscoelastic model and the linear elastic model, are established to analyze the curing deformation of the thermosetting resin composites, and are calculated by COMSOL Multiphysics software. The two models consider the complicated coupling between physical and chemical changes during curing process of the composites and the time-variant characteristic of material performance parameters. Subsequently, the two proposed models are implemented respectively in a three-dimensional composite laminate structure, and a simple and convenient method of local coordinate system is used to calculate the development of residual stresses, curing shrinkage and curing deformation for the composite laminate. Researches show that the temperature, degree of curing (DOC) and residual stresses during curing process are consistent with the study in literature, so the curing shrinkage and curing deformation obtained on these basis have a certain referential value. Compared the differences between the two numerical results, it indicates that the residual stress and deformation calculated by the viscoelastic model are more close to the reference value than the linear elastic model. |
资助项目 | National Natural Science Foundation of China[11664023] |
WOS研究方向 | Materials Science |
语种 | 英语 |
出版者 | SPRINGER |
WOS记录号 | WOS:000431879500004 |
状态 | 已发表 |
内容类型 | 期刊论文 |
源URL | [http://119.78.100.223/handle/2XXMBERH/32608] |
专题 | 材料科学与工程学院 理学院 |
通讯作者 | Li, Dongna |
作者单位 | 1.Lanzhou Univ Technol, Sch Mat Sci & Engn, Lanzhou 730050, Gansu, Peoples R China 2.Lanzhou Univ Technol, Sch Sci, Lanzhou 730050, Gansu, Peoples R China |
推荐引用方式 GB/T 7714 | Li, Dongna,Li, Xudong,Dai, Jianfeng. Process Modelling of Curing Process-Induced Internal Stress and Deformation of Composite Laminate Structure with Elastic and Viscoelastic Models[J]. APPLIED COMPOSITE MATERIALS,2018,25(3):527-544. |
APA | Li, Dongna,Li, Xudong,&Dai, Jianfeng.(2018).Process Modelling of Curing Process-Induced Internal Stress and Deformation of Composite Laminate Structure with Elastic and Viscoelastic Models.APPLIED COMPOSITE MATERIALS,25(3),527-544. |
MLA | Li, Dongna,et al."Process Modelling of Curing Process-Induced Internal Stress and Deformation of Composite Laminate Structure with Elastic and Viscoelastic Models".APPLIED COMPOSITE MATERIALS 25.3(2018):527-544. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论