Design of milling cutter for machining helical curved surfaces

doi:10.4028/www.scientific.net/AMM.44-47.748

CORC > 兰州理工大学 > 兰州理工大学 > 机电工程学院

	Design of milling cutter for machining helical curved surfaces
	Yang, Jianjun 1,2; Wu, Qin 1,2; Gong, Jun 1; Rui, Zhiyuan 1
	2011
会议日期	December 11, 2010 - December 12, 2010
会议地点	Chongqing, China
关键词	Compressors Cutting Cutting tools Design Machine tools Manufacture Milling cutters Surfaces Curved surfaces Discal milling cutter Profile Screw compressors Work pieces
卷号	44-47
DOI	10.4028/www.scientific.net/AMM.44-47.748
页码	748-753
英文摘要	The article focused on the design of milling cutter for machining helical curved surfaces. First, the characteristics of 3th generation profile in screw compressor were presented; then the equation of touch line between milling cutter and workpiece was constituted based on the envelop principle from milling cutter rolling surface and spiral curved surface; and elementary theories and methods were put forward for designing contour of milling cutter in machining spiral curved surfaces, finally the calculate equation was validated through the machining example by Matlab. © (2011) Trans Tech Publications.
会议录	Applied Mechanics and Materials
会议录出版者	Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany
语种	英语
ISSN号	16609336
内容类型	会议论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/115881]
专题	机电工程学院兰州理工大学
作者单位	1.School of Mechanical and Electronical Engineering, Lanzhou University of Technology, Lanzhou, 730050, Gansu, China 2.Key Laboratory of Digital Manufacturing Technology and Application, Lanzhou University of Technology, Ministry of Education, Lanzhou, 730050, Gansu, China;
推荐引用方式 GB/T 7714	Yang, Jianjun,Wu, Qin,Gong, Jun,et al. Design of milling cutter for machining helical curved surfaces[C]. 见:. Chongqing, China. December 11, 2010 - December 12, 2010.