Research on cutting-temperature field and distribution of heat rates among a workpiece, cutter, and chip for high-speed cutting based on analytical and numerical methods

doi:10.1007/s11223-014-9549-3

CORC > 兰州理工大学 > 兰州理工大学

	Research on cutting-temperature field and distribution of heat rates among a workpiece, cutter, and chip for high-speed cutting based on analytical and numerical methods
	An, H. P.2; Rui, Z. Y.1; Wang, R. F.3; Zhang, Z. M.3
刊名	Strength of Materials
	2014-03-01
卷号	46 期号:2 页码:289-295
关键词	Cutting Energy utilization Heat generation MATLAB Numerical methods Temperature Temperature distribution Analytical and numerical methods Analytical method Cutting deformations Cutting heat Cutting temperature Dry cutting High speed machining Thermal equilibriums
ISSN号	00392316
DOI	10.1007/s11223-014-9549-3
英文摘要	High-speed cutting is widely employed in aerospace, automotive, die, and other industries. However, no comprehensive mechanism of high-speed cutting behavior was as yet comprehended completely. Models of thermal sources and fields of cutting temperature are proposed for analysis of thermal equilibrium between heat generation and energy consumption at high-speed dry cutting. Mathematic models of cutting temperature for three cutting deformation areas are developed to analyze heat generation and release behavior in high-speed machining. The ratios of heat distribution among a chip, cutter and workpiece were found for different cutting speeds using the MATLAB software. © 2014 Springer Science+Business Media New York.
资助项目	Postgraduate Tutors Scientific Research Project of Gan Su Province Education Department, China[1212-205]
WOS研究方向	Materials Science
语种	英语
出版者	Springer New York LLC
WOS记录号	WOS:000335906500021
状态	已发表
内容类型	期刊论文
源URL	[http://ir.lut.edu.cn/handle/2XXMBERH/113684]
专题	兰州理工大学机电工程学院
通讯作者	An, H. P.
作者单位	1.Lanzhou Univ Technol, Coll Mechanoelect Engn, Lanzhou, Peoples R China 2.Lanzhou City Univ, Inst Mech Inspect & Fault Diag, Lanzhou, Peoples R China 3.Lanzhou Jiao Tong Univ, Lanzhou, Peoples R China
推荐引用方式 GB/T 7714	An, H. P.,Rui, Z. Y.,Wang, R. F.,et al. Research on cutting-temperature field and distribution of heat rates among a workpiece, cutter, and chip for high-speed cutting based on analytical and numerical methods[J]. Strength of Materials,2014,46(2):289-295.
APA	An, H. P.,Rui, Z. Y.,Wang, R. F.,&Zhang, Z. M..(2014).Research on cutting-temperature field and distribution of heat rates among a workpiece, cutter, and chip for high-speed cutting based on analytical and numerical methods.Strength of Materials,46(2),289-295.
MLA	An, H. P.,et al."Research on cutting-temperature field and distribution of heat rates among a workpiece, cutter, and chip for high-speed cutting based on analytical and numerical methods".Strength of Materials 46.2(2014):289-295.