Modification for scroll wrap height of a scroll compressor

doi:10.1177/0954406211414640

CORC > 兰州理工大学 > 兰州理工大学

	Modification for scroll wrap height of a scroll compressor
	Jianguo, Q.
刊名	PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
	2012
卷号	226 期号:C3 页码:763-774
关键词	scroll compressor scroll wrap modification
ISSN号	0954-4062
DOI	10.1177/0954406211414640
英文摘要	In order to obtain better axial hermetic seal of scroll compression chambers and hence a better performance for a scroll compressor, two modification methods for scroll wrap height are proposed based on the axial deformation of the scroll wrap. First, the design modification, which allows the scroll wrap height and its dimensional tolerances to be designed based on the axial deformation of scroll wrap in the basic shaft system, is suitable for mass production of scroll compressors. Second, the special modification, which allows the scroll wrap height to be modified based on the axial deformation of scroll wrap after its manufacturing, can be used for single-piece production of scroll compressor or for the scroll compressors available. A special modification was conducted for a scroll compressor, in which the orbiting scroll wrap was modified based on the simulation results of its axial deformation. According to the tests conducted later, the performance of the scroll compressor with modified scroll wrap can significantly be improved without deteriorating its original manufacturing precision.
资助项目	Doctor Foundation of Lanzhou University of Technology[BS02200902] ; Natural Science Foundation of China[50975132]
WOS研究方向	Engineering
语种	英语
出版者	SAGE PUBLICATIONS LTD
WOS记录号	WOS:000300455700018
状态	已发表
内容类型	期刊论文
源URL	[http://119.78.100.223/handle/2XXMBERH/34963]
专题	兰州理工大学
通讯作者	Jianguo, Q.
作者单位	Lanzhou Univ Technol, Sch Mechanoelect Engn, Lanzhou 730050, Peoples R China
推荐引用方式 GB/T 7714	Jianguo, Q.. Modification for scroll wrap height of a scroll compressor[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2012,226(C3):763-774.
APA	Jianguo, Q..(2012).Modification for scroll wrap height of a scroll compressor.PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,226(C3),763-774.
MLA	Jianguo, Q.."Modification for scroll wrap height of a scroll compressor".PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 226.C3(2012):763-774.