Temperature distribution and its influence on microstructure of Mg-3Sn-1Mn alloy during rheo-rolling process

doi:10.1080/14786435.2018.1487602

CORC > 兰州理工大学 > 兰州理工大学

	Temperature distribution and its influence on microstructure of Mg-3Sn-1Mn alloy during rheo-rolling process
	Zhao, Zhan-Yong 1; Guan, Ren-guo 2,3; Shen, Yong-feng 3,4; Li, Jing 1; Bai, Pei-Kang 1
刊名	PHILOSOPHICAL MAGAZINE
	2018
卷号	98 期号:26 页码:2367-2379
关键词	Semisolid rheo-rolling Mg-3Sn-1Mn alloy temperature simulation
ISSN号	1478-6435
DOI	10.1080/14786435.2018.1487602
英文摘要	In this paper, an innovative semisolid rheo-rolling process of Mg-3Sn-1Mn alloy was proposed; the temperature distribution and its influence on microstructure of Mg-3Sn-1Mn alloy during the semisolid rheo-rolling process were studied. The alloy temperature decreased gradually from the entrance to the exit of the slope plate, and the alloy velocity increased gradually. The temperature of the alloy near the slope plate surface was lower than that of melt surface. The alloy temperature decreased gradually from the entrance to the exit of the roll gap. In the roll gap, the nearer the roll was, the lower the alloy temperature was. With the increment of casting temperature, the semisolid zone increased and moved forward from the filling mouth to the exit of the roll gap. When the casting temperature was 670 degrees C and the roll speed was 0.052m/s, Mg-3Sn-1Mn alloy strip with good surface quality was obtained. Homogeneous microstructure was obtained. Mechanical properties of the present product at room temperature or 150 degrees C are higher than that of Mg-3Sn-1Mn-0.87Ce prepared by casting.
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering ; Physics
语种	英语
出版者	TAYLOR & FRANCIS LTD
WOS记录号	WOS:000441058500001
状态	已发表
内容类型	期刊论文
源URL	[http://119.78.100.223/handle/2XXMBERH/32949]
专题	兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室
通讯作者	Zhao, Zhan-Yong; Guan, Ren-guo
作者单位	1.North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Shanxi, Peoples R China 2.Northwestern Polytech Univ, Sch Mat Sci & Engn, Xian 710072, Shaanxi, Peoples R China 3.Northeastern Univ, Sch Mat Sci & Engn, Shenyang, Liaoning, Peoples R China 4.Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou, Gansu, Peoples R China
推荐引用方式 GB/T 7714	Zhao, Zhan-Yong,Guan, Ren-guo,Shen, Yong-feng,et al. Temperature distribution and its influence on microstructure of Mg-3Sn-1Mn alloy during rheo-rolling process[J]. PHILOSOPHICAL MAGAZINE,2018,98(26):2367-2379.
APA	Zhao, Zhan-Yong,Guan, Ren-guo,Shen, Yong-feng,Li, Jing,&Bai, Pei-Kang.(2018).Temperature distribution and its influence on microstructure of Mg-3Sn-1Mn alloy during rheo-rolling process.PHILOSOPHICAL MAGAZINE,98(26),2367-2379.
MLA	Zhao, Zhan-Yong,et al."Temperature distribution and its influence on microstructure of Mg-3Sn-1Mn alloy during rheo-rolling process".PHILOSOPHICAL MAGAZINE 98.26(2018):2367-2379.