TA15 and inconel 625 bimetallic structures additive manufacturing and phased array ultrasonic testing

CORC > 沈阳自动化研究所 > 中国科学院沈阳自动化研究所 > 工艺装备与智能机器人研究室

	TA15 and inconel 625 bimetallic structures additive manufacturing and phased array ultrasonic testing
	He ZF(何振丰)2,3; Zhao JB(赵吉宾)2,3; Zhao YH(赵宇辉)2,3; Wang ZG(王志国)2,3; Shang, Chun 1; He C(贺晨)2,3
刊名	Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
	2022
页码	1-5
关键词	Additive manufacturing laser metal deposition bimetallic structures interface crack detection phased array ultrasonic testing
ISSN号	0954-4062
产权排序	1
英文摘要	Additive manufacturing of bimetallic structures has become a hotspot in recent years. However, the interfaces of bimetallic structures are always the weaknesses, and cracks always occur at the interfaces. Three bimetallic samples of TA15 and Inconel 625 were manufactured by laser metal deposition, and the effect of laser power on the manufacturing quality was analyzed. Then phased array ultrasonic testing (PAUT) technique was applied for crack detection for the three samples, and metallographic analysis was employed to verify detection results. The results showed that the increase of laser power can eliminate macro-cracks at the interface of the bimetallic sample, and micro-cracks at the interface can be detected by PAUT.
资助项目	Special Funds for the Central Government to Guide Local Scientific and Technological Development[2021JH6/10500119]
WOS关键词	FUNCTIONALLY GRADED MATERIAL ; WIRE
WOS研究方向	Engineering
语种	英语
WOS记录号	WOS:000772417600001
资助机构	Special Funds for the Central Government to Guide Local Scientific and Technological Development (Grant No. 2021JH6/10500119).
内容类型	期刊论文
源URL	[http://ir.sia.cn/handle/173321/30610]
专题	工艺装备与智能机器人研究室
通讯作者	Zhao JB(赵吉宾); Zhao YH(赵宇辉)
作者单位	1.School of Material Science and Engineering, Shenyang University of Technology, Shenyang 110870, China 2.Institutes for Robotics and Intelligent Manufacturing, Chinese Academy of Sciences, Shenyang 110169, China 3.Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
推荐引用方式 GB/T 7714	He ZF,Zhao JB,Zhao YH,et al. TA15 and inconel 625 bimetallic structures additive manufacturing and phased array ultrasonic testing[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2022:1-5.
APA	He ZF,Zhao JB,Zhao YH,Wang ZG,Shang, Chun,&He C.(2022).TA15 and inconel 625 bimetallic structures additive manufacturing and phased array ultrasonic testing.Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,1-5.
MLA	He ZF,et al."TA15 and inconel 625 bimetallic structures additive manufacturing and phased array ultrasonic testing".Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2022):1-5.