Fastening torque simulation method of pressure-ring based on finite element simulation analysis and experimental verification | |
Zhao, Yue; Kang, Shifa; Fu, Xihong; Zhang, Gaopeng | |
2022 | |
会议日期 | 2021-10-28 |
会议地点 | Shanghai, China |
关键词 | Optical adjustment Tightening moment Connection strength Simulation modeling Finite element analysis |
卷号 | 12166 |
DOI | 10.1117/12.2611752 |
英文摘要 | Aiming at the problem of abnormal sound of lens caused by incomplete tightening of pressure coil after optical lens installation, this paper presents a method for calculating and verifying the tightening moment of pressure coil. According to the mechanical dimension of the screw thread of the pressing ring, the mechanical properties of the pressing ring of the mirror tube and the optimal number of turning rings were calculated and analyzed. In order to meet the practical application requirements, the tightening moment of the pressure coil obtained by the solution was brought into the 3D model for simulation, and the finite element modeling analysis of the tightening moment of the pressure coil of the optical lens was completed, so as to further solve the displacement variation of the lens group. Finally, the above analysis results were quantified by torque wrenches, and random vibration was carried out at one third of the order of acceptance level vibration test conditions, so as to complete the bottom analysis and verify the tightening torque of the screw ring under different ratios of XM-31 adhesive and vulcanizing agent. The experimental results show that the characteristic sweep curve of the optical lens does not change before and after the vibration, the mode of the optical lens remains stable all the time, and the data modal analysis results are consistent with the actual situation. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only. |
产权排序 | 1 |
会议录 | Seventh Asia Pacific Conference on Optics Manufacture, APCOM 2021 |
会议录出版者 | SPIE |
语种 | 英语 |
ISSN号 | 0277786X;1996756X |
ISBN号 | 9781510652088 |
内容类型 | 会议论文 |
源URL | [http://ir.opt.ac.cn/handle/181661/95752] |
专题 | 西安光学精密机械研究所_系统工程部 |
作者单位 | Xi'An Institute of Optics and Precision Mechanics, Chinese Academy of Sciences. xi'An, ShaanXi; 710119, China |
推荐引用方式 GB/T 7714 | Zhao, Yue,Kang, Shifa,Fu, Xihong,et al. Fastening torque simulation method of pressure-ring based on finite element simulation analysis and experimental verification[C]. 见:. Shanghai, China. 2021-10-28. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论