CORC  > 金属研究所  > 中国科学院金属研究所
Oxygen addition for improving the strength and plasticity of TiZr-based amorphous alloy composites
Zhao, Ziyan1; Mu, Juan1; Zhang, Haifeng2; Wang, Yandong1; Ren, Yang3
刊名JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
2021-07-20
卷号79页码:212-221
关键词Amorphous alloy Composite Oxygen Martensitic phase transformation Omega phase
ISSN号1005-0302
DOI10.1016/j.jmst.2020.12.005
通讯作者Mu, Juan(muj@atm.neu.edu.cn) ; Wang, Yandong(ydwang@mail.neu.edu.cn)
英文摘要The addition of a small amount of oxygen improves the mechanical properties, especially plasticity, of Ti45.7Zr33Ni3Cu5.8Be12.5 amorphous alloy composites (AACs) at room temperature (298 K). Compared to the plasticity of AACs without added O (5%), the plasticity of the composites with 0.73 at.% O (nominal composition) was much higher (11 %). Even at O content higher than 0.73 at.%, the AACs exhibited good plasticity. The highest plasticity of similar to 12.3 % was observed with 2.87 at.% O. Two distinct mechanisms are proposed to explain the enhanced plasticity of the AACs. At low O content, although deformationinduced phase transformation was suppressed, a substantial amount of alpha '' martensite was formed. The microstructural features of alpha '' martensite, such as thinner laths and homogeneous distribution, induced the formation of multiple shear bands in the amorphous matrix. At high O content, deformation-induced phase transformation was seriously suppressed. A dispersed nano omega phase was formed during rapid solidification in AACs with O content higher than 1.45 at.%. This resulted in a weakening in the anisotropy of beta dendrites and led to their homogenous deformation. Furthermore, multiple shear bands were formed in the amorphous matrix. Apart from plasticity, the strength of the AACs also increased with an increase in the O content. This phenomenon was explained in terms of three mechanisms, viz. the solid-solutionstrengthening effect of O, fine-grain strengthening of beta dendrites, and secondary phase strengthening by the nano omega phase. (C) 2021 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
资助项目National Natural Science Foundation of China[51771049] ; National Natural Science Foundation of China[51790484]
WOS研究方向Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
出版者JOURNAL MATER SCI TECHNOL
WOS记录号WOS:000654379000023
资助机构National Natural Science Foundation of China
内容类型期刊论文
源URL[http://ir.imr.ac.cn/handle/321006/161391]  
专题金属研究所_中国科学院金属研究所
通讯作者Mu, Juan; Wang, Yandong
作者单位1.Northeastern Univ, Sch Mat Sci & Engn, Key Lab Anisotropy & Texture Mat MOE, Shenyang 110004, Peoples R China
2.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China
3.Argonne Natl Lab, Xray Sci Div, Argonne, IL 60439 USA
推荐引用方式
GB/T 7714
Zhao, Ziyan,Mu, Juan,Zhang, Haifeng,et al. Oxygen addition for improving the strength and plasticity of TiZr-based amorphous alloy composites[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2021,79:212-221.
APA Zhao, Ziyan,Mu, Juan,Zhang, Haifeng,Wang, Yandong,&Ren, Yang.(2021).Oxygen addition for improving the strength and plasticity of TiZr-based amorphous alloy composites.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,79,212-221.
MLA Zhao, Ziyan,et al."Oxygen addition for improving the strength and plasticity of TiZr-based amorphous alloy composites".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 79(2021):212-221.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace