On the measurements of individual particle properties via compression and crushing | |
Liu, Chunlong2,3; Liu, Fengyin2; Song, Jinliang1,3; Ma, Fuli3,4; Wang, Dongfang3; Zhang, Guoping3 | |
刊名 | JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING |
2021-04-01 | |
卷号 | 13期号:2页码:377-389 |
关键词 | Elasticity Hertz contact Particle crushing Strength Yielding Weibull distribution |
ISSN号 | 1674-7755 |
DOI | 10.1016/j.jrmge.2020.06.009 |
英文摘要 | An experimental study is presented to measure the elastic, yielding, and crushing properties of individual particles under compression using substrates made of aluminum alloy, stainless steel, and sapphire. Carefully selected, highly spherical individual Ottawa sand particles of 0.75-1.1 mm in nominal diameter were compressed between two smooth substrates, and the load-deformation curves were analyzed by Hertz elastic contact theory to derive their reduced modulus and Young's modulus as well as yielding and crushing strengths, which vary significantly with the type of substrate materials. Further analysis of the yielding and plastic deformation at the particle-substrate contact shows that the yield strength or hardness of the substrate materials dominates the local contact behavior and hence affects the measured apparent yielding and crushing strengths. The two softer substrates (aluminum alloy and stainless steel) actually lead to underestimated apparent shear yield strengths of quartz particles by 60.4% and 54.2%, respectively, which are actually the yielding of substrates, while the true particle yielding occurs in the sapphire-particle contact. Moreover, the two softer substrates cause much overestimated crushing strengths of the quartz particles by 50.4% and 36.4%, respectively. Selection of inappropriate substrate materials and inappropriate interpretation of the particle-substrate contact can lead to significant errors in the measured yielding and crushing strengths. It is recommended that single particle compression testing uses substrates with yield strength greater than that of the tested particles and result interpretation also considers the elastic and yielding behaviors of the substrates. (C) 2021 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. |
资助项目 | National Natural Science Foundation of China[41372304] ; National Natural Science Foundation of China[51679198] ; China Scholarship Council Fellowship |
WOS研究方向 | Engineering |
语种 | 英语 |
出版者 | SCIENCE PRESS |
WOS记录号 | WOS:000642450300010 |
内容类型 | 期刊论文 |
源URL | [http://119.78.100.198/handle/2S6PX9GI/27180] |
专题 | 中科院武汉岩土力学所 |
通讯作者 | Zhang, Guoping |
作者单位 | 1.Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn, Wuhan 430071, Peoples R China 2.Xian Univ Technol, Inst Geotech Engn, Xian 710048, Peoples R China 3.Univ Massachusetts, Dept Civil & Environm Engn, Amherst, MA 01003 USA 4.Taiyuan Univ Technol, Coll Architecture & Civil Engn, Taiyuan 030024, Peoples R China |
推荐引用方式 GB/T 7714 | Liu, Chunlong,Liu, Fengyin,Song, Jinliang,et al. On the measurements of individual particle properties via compression and crushing[J]. JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING,2021,13(2):377-389. |
APA | Liu, Chunlong,Liu, Fengyin,Song, Jinliang,Ma, Fuli,Wang, Dongfang,&Zhang, Guoping.(2021).On the measurements of individual particle properties via compression and crushing.JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING,13(2),377-389. |
MLA | Liu, Chunlong,et al."On the measurements of individual particle properties via compression and crushing".JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING 13.2(2021):377-389. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论