The influence of the MRE forming medium and axial feeding on the forming quality of thin-walled Inconel 718 bellow manufactured by a bulging process: finite element simulation and experimentation

doi:10.1007/s00170-020-06386-4

CORC > 金属研究所 > 中国科学院金属研究所

	The influence of the MRE forming medium and axial feeding on the forming quality of thin-walled Inconel 718 bellow manufactured by a bulging process: finite element simulation and experimentation
	Hu, Shenghan 1,4; Abd El-Aty, Ali 1,3,4; Cheng, Cheng 1,4; Yang, Qiucheng 1,4; Qin, Yao 1,4; Li, Tao 1,4; Wu, Cong 1,4; Guo, Xunzhong 1,4; Tao, Jie 1,4; Xu, Yong 2
刊名	INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
	2020-11-20
页码	14
关键词	Thin-walled bellow Bulging process Magnetorheological elastomer (MRE) Magnetic field intensity Axial feeding Wall thinning distribution
ISSN号	0268-3768
DOI	10.1007/s00170-020-06386-4
通讯作者	Tao, Jie(taojie@nuaa.edu.cn) ; Xu, Yong(yxu@imr.ac.cn)
英文摘要	Manufacturing thin-walled metallic bellow is a complicated forming process, and defects such as wrinkling, cracking, and over-thinning quickly occur because of the complex compressive and tensile stress state. To achieve high-quality products, it is crucial to study the forming characteristics and explore proper forming parameters in advance for a particular metallic bellow. Thus, this investigation is aimed at studying the effect of using the magnetorheological elastomer (MRE) forming medium and the axial feeding on the forming quality of thin-walled Inconel 718 bellow during the bulging process. The change of MRE's mechanical properties is combined with the basic principle of the bulging process. The process of coupling three different axial loading paths and three magnetic field loading conditions was explored through finite element (FE) simulation. The results obtained from the FE simulation showed that the forming quality of the proposed thin-walled bellow is the best when the magnetic field intensity is 0.14 T, and the punch step length is 7 mm. The experimental results are in a remarkable agreement with those obtained from simulation, confirming the simulation's validity.
资助项目	Key Program of the National Natural Foundation of China[U1937206] ; Jiangsu Province Key Research and Development Project[BE2019007-2] ; Natural Science Foundation of Jiangsu Province[SBK2020044364] ; National Natural Science Foundation International (regional) cooperation and exchange project[51711540301] ; Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology[ASMA201903] ; Basic scientific research operating expenses[NT2020015]
WOS研究方向	Automation & Control Systems ; Engineering
语种	英语
出版者	SPRINGER LONDON LTD
WOS记录号	WOS:000591146600001
资助机构	Key Program of the National Natural Foundation of China ; Jiangsu Province Key Research and Development Project ; Natural Science Foundation of Jiangsu Province ; National Natural Science Foundation International (regional) cooperation and exchange project ; Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology ; Basic scientific research operating expenses
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/141363]
专题	金属研究所_中国科学院金属研究所
通讯作者	Tao, Jie; Xu, Yong
作者单位	1.Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 211100, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 3.Helwan Univ, Fac Engn Helwan, Dept Mech Engn, Cairo, Egypt 4.Nanjing Univ Aeronaut & Astronaut, Jiangsu Key Lab Nucl Energy Equipment Mat Engn, Nanjing 211100, Peoples R China
推荐引用方式 GB/T 7714	Hu, Shenghan,Abd El-Aty, Ali,Cheng, Cheng,et al. The influence of the MRE forming medium and axial feeding on the forming quality of thin-walled Inconel 718 bellow manufactured by a bulging process: finite element simulation and experimentation[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2020:14.
APA	Hu, Shenghan.,Abd El-Aty, Ali.,Cheng, Cheng.,Yang, Qiucheng.,Qin, Yao.,...&Xu, Yong.(2020).The influence of the MRE forming medium and axial feeding on the forming quality of thin-walled Inconel 718 bellow manufactured by a bulging process: finite element simulation and experimentation.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,14.
MLA	Hu, Shenghan,et al."The influence of the MRE forming medium and axial feeding on the forming quality of thin-walled Inconel 718 bellow manufactured by a bulging process: finite element simulation and experimentation".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020):14.