Deformation behaviors of as-built and hot isostatically pressed Ti-6Al-4V alloys fabricated via electron beam rapid manufacturing | |
Liu, Z.1,2; Zhao, Z. B.1; Liu, J. R.1; Wang, L.1; Zhu, S. X.1; Yang, G.3; Gong, S. L.3; Wang, Q. J.1; Yang, R.1 | |
刊名 | JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY |
2019-11-01 | |
卷号 | 35期号:11页码:2552-2558 |
关键词 | Electron beam rapid manufacturing Ti-6Al-4V Hot isostatic pressure Mechanical properties Slip behavior |
ISSN号 | 1005-0302 |
DOI | 10.1016/j.jmst.2019.04.032 |
通讯作者 | Zhao, Z. B.(zbzhao@imr.ac.cn) ; Liu, J. R.(jrliu@imr.ac.cn) |
英文摘要 | The deformation behavior of as-built and hot isostatically pressed (HIP) Ti-6Al-4 V alloys fabricated using electron beam rapid manufacturing (EBRM) were investigated in this work. The deformation characteristics were characterized using a laser scanning confocal microscope and electron back-scattered diffraction (EBSD). In the as-built sample, prismatic slip was the main mode of deformation, as well as a small amount of basal slip and cross-slip. Some planar slip lines with large length scales were observed across several c lamellae. After hot isostatical pressing, prismatic and basal slip were the main mode of deformation, accompanied by abundant cross-slip and multiple slip, and most of the slip lines were blocked within an c lamellae. These differences in deformation behavior were associated with the coarsening of c laths and the more retained p phase after HIP compared to the as-built alloy. More cross-slip and multiple slip can lead to superior elongation-to-failure and a greater strain hardening effect in the HIP alloy compared to the as-built sample. (C) 2019 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology. |
资助项目 | National Key Research and Development Program of China[2017YFB1103100] ; Avic Science Foundation of China[20175492002] ; National Natural Science Foundation of China[51801213] |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | JOURNAL MATER SCI TECHNOL |
WOS记录号 | WOS:000497965900015 |
资助机构 | National Key Research and Development Program of China ; Avic Science Foundation of China ; National Natural Science Foundation of China |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/136023] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Zhao, Z. B.; Liu, J. R. |
作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230000, Anhui, Peoples R China 3.Avic Mfg Technol Inst, Beijing 100024, Peoples R China |
推荐引用方式 GB/T 7714 | Liu, Z.,Zhao, Z. B.,Liu, J. R.,et al. Deformation behaviors of as-built and hot isostatically pressed Ti-6Al-4V alloys fabricated via electron beam rapid manufacturing[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2019,35(11):2552-2558. |
APA | Liu, Z..,Zhao, Z. B..,Liu, J. R..,Wang, L..,Zhu, S. X..,...&Yang, R..(2019).Deformation behaviors of as-built and hot isostatically pressed Ti-6Al-4V alloys fabricated via electron beam rapid manufacturing.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,35(11),2552-2558. |
MLA | Liu, Z.,et al."Deformation behaviors of as-built and hot isostatically pressed Ti-6Al-4V alloys fabricated via electron beam rapid manufacturing".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 35.11(2019):2552-2558. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论