Optimization and Simulation of Deformation Parameters of SiC/2009Al Composites | |
Ma Kai1,2; Zhang Xingxing1; Wang Dong1; Wang Quanzhao1; Liu Zhenyu1; Xiao Bolv1; Ma Zongyi1 | |
刊名 | ACTA METALLURGICA SINICA |
2019-10-11 | |
卷号 | 55期号:10页码:1329-1337 |
关键词 | aluminum matrix composite hot deformation constitutive equation finite element simulation |
ISSN号 | 0412-1961 |
DOI | 10.11900/0412.1961.2019.00020 |
通讯作者 | Xiao Bolv(blxiao@imr.ac.cn) |
英文摘要 | Particle reinforced aluminum matrix composites (PRAMCs) have the advantages of high specific strength and high specific modulus, and are important engineering materials for aerospace field. However, due to the huge difference in the mechanical properties between the reinforcements and the aluminum matrixes, the plastic forming of PRAMCs is quite difficult, which restricts their wide engineering applications. In order to improve the quality of plastic processing, it is necessary to optimize deformation parameters of PRAMCs. In this study, the hot deformation parameters of a 15%SiC/2009Al composite fabricated by powder metallurgy were optimized using a simulation method. Firstly, true stress-strain curves of the SiC/2009Al composite were obtained through hot compression tests, and then the strain rate sensitivity index (m) map at the ultimate strain was established. Under the deformation parameters corresponding to various m values, the finite element simulation of the hot compression process was carried out. The flow stress, strain and damage coefficient distribution of the hot-compressed samples were analyzed. The results show that it is reliable to use the m value as the basis for optimizing the processing parameters, which were further verified by the microstructural observations. The deformation temperature and strain rate corresponding to the optimum parameters of the composite were determined to be 500 and 0.01 s(-1), respectively. |
资助项目 | National Key Research and Development Program of China[2017YFB0703104] ; National Natural Science Foundation of China[51871214] ; National Natural Science Foundation of China[U1508216] |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | SCIENCE PRESS |
WOS记录号 | WOS:000487716200011 |
资助机构 | National Key Research and Development Program of China ; National Natural Science Foundation of China |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/135534] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Xiao Bolv |
作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China |
推荐引用方式 GB/T 7714 | Ma Kai,Zhang Xingxing,Wang Dong,et al. Optimization and Simulation of Deformation Parameters of SiC/2009Al Composites[J]. ACTA METALLURGICA SINICA,2019,55(10):1329-1337. |
APA | Ma Kai.,Zhang Xingxing.,Wang Dong.,Wang Quanzhao.,Liu Zhenyu.,...&Ma Zongyi.(2019).Optimization and Simulation of Deformation Parameters of SiC/2009Al Composites.ACTA METALLURGICA SINICA,55(10),1329-1337. |
MLA | Ma Kai,et al."Optimization and Simulation of Deformation Parameters of SiC/2009Al Composites".ACTA METALLURGICA SINICA 55.10(2019):1329-1337. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论