Effects of multi-pass drawing strain and heat treatment on microstructure, texture and mechanical properties of Ti-6Al-4V alloy | |
Hu, Ming1,2; Dong, Limin2; Zhang, Zhiqiang2; Lei, Xiaofei2; Yang, Rui2; Sha, Yuhui1 | |
刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
2019-05-29 | |
卷号 | 757页码:70-83 |
关键词 | Ti-6Al-4V alloy Multi-pass drawing Microstructure Texture Mechanical properties |
ISSN号 | 0921-5093 |
DOI | 10.1016/j.msea.2019.04.087 |
通讯作者 | Dong, Limin(lmdong@imr.ac.cn) |
英文摘要 | In this study, a rolled Ti-6Al-4V alloy bar was processed by multi-pass drawing till 60% strain. The drawn state specimens were annealed and solid solution aged. The microstructure evolution characteristics, texture evolution features and mechanical properties changes were systematically investigated. During drawing, alpha grains were gradually elongated and beta( )grains were split. The alpha phase developed a fiber texture with < 01<(1)over bar>0 > parallel to the drawing direction, and the texture intensity increased with increasing the strain. The yield strength and ultimate tensile strength increased up to 1164 MPa and 1235 MPa respectively with increasing the strain. Annealing resulted in the recovery and the recrystallization of alpha grains and globularization of partial beta grains. The intensity of < 01<(1)over bar>0 > fiber texture decreased compared to the drawn state specimens. The tensile strength decreased and the ductility increased compared to the drawn state specimens and the strength followed the Hall-Petch relationship. After solid solution aging heat treatment, the microstructure consisted of primary alpha grains and transformed beta grains. The tensile strength was obviously higher than the annealed state due to smaller alpha plates thickness and dispersion strengthening effects. Refinement of transformed beta grains and alpha plates thickness led to the higher tensile strength in the higher strain specimens. |
WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | ELSEVIER SCIENCE SA |
WOS记录号 | WOS:000470944600008 |
内容类型 | 期刊论文 |
源URL | [http://ir.imr.ac.cn/handle/321006/133982] |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Dong, Limin |
作者单位 | 1.Northeastern Univ, Minist Educ, Key Lab Anisotropy & Texture Mat, Shenyang 110819, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, 72 Shenhe Dist, Shenyang 110016, Liaoning, Peoples R China |
推荐引用方式 GB/T 7714 | Hu, Ming,Dong, Limin,Zhang, Zhiqiang,et al. Effects of multi-pass drawing strain and heat treatment on microstructure, texture and mechanical properties of Ti-6Al-4V alloy[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2019,757:70-83. |
APA | Hu, Ming,Dong, Limin,Zhang, Zhiqiang,Lei, Xiaofei,Yang, Rui,&Sha, Yuhui.(2019).Effects of multi-pass drawing strain and heat treatment on microstructure, texture and mechanical properties of Ti-6Al-4V alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,757,70-83. |
MLA | Hu, Ming,et al."Effects of multi-pass drawing strain and heat treatment on microstructure, texture and mechanical properties of Ti-6Al-4V alloy".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 757(2019):70-83. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论