Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed beta-Type Titanium Alloys for Orthopedic Applications | |
Fellah, Mamoun; Hezil, Naouel; Abdul Samad, Mohammed; Djellabi, Ridha; Montagne, Alex; Mejias, Alberto; Kossman, Stephania; Iost, Alain; Purnama, Agung; Obrosov, Aleksei | |
刊名 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE |
2019-10-01 | |
卷号 | 28期号:10页码:5988-5999 |
关键词 | friction behavior hot isostatic pressing milling nanobiomaterials Ti-Mo alloy beta-type titanium alloy tribology wear resistance |
ISSN号 | 1059-9495 |
英文摘要 | Aiming to develop alloys with better properties for orthopedic applications, the focus of the present research was to evaluate the effect of Mo at.% content on structural, mechanical, and tribological properties of hot isostatically pressed Ti-xMo (x=4, 8, 12, 15, and 20 at.%) alloys. The structural evolution, mechanical properties, and tribological behavior of the nanostructured Ti-xMo alloys were evaluated using x-ray diffraction, scanning electron microscope, and ball-on-disk tribometer. Wear tests were conducted under different applied loads of 2, 8, and 16 N. Experimental results indicated that the structural evolution and morphological changes of the milled alloys were sensitive to their molybdenum (Mo) content. The morphological characterization showed that the crystallite size and the particle size decreased with increasing Mo content (at.%) reaching the lowest values of 27 and 26 nm in the case of Ti-15Mo and Ti-20Mo, respectively. On the other hand, the coefficient of friction and wear rates were found to be decreasing with increasing Mo content. |
内容类型 | 期刊论文 |
源URL | [http://ir.rcees.ac.cn/handle/311016/43442] |
专题 | 生态环境研究中心_中国科学院饮用水科学与技术重点实验室 |
作者单位 | 1.Annaba Univ, Tribol & Mat, Lab Foundry, BO 12, Annaba 23000, Algeria 2.ABBES Laghrour Khenchela Univ, Dept Mech Engn, PO 1252, El Hamma 40004, Algeria 3.ABBES Laghrour Khenchela Univ, Mater Sci Dept, PO 1252, El Hamma, Algeria |
推荐引用方式 GB/T 7714 | Fellah, Mamoun,Hezil, Naouel,Abdul Samad, Mohammed,et al. Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed beta-Type Titanium Alloys for Orthopedic Applications[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2019,28(10):5988-5999. |
APA | Fellah, Mamoun.,Hezil, Naouel.,Abdul Samad, Mohammed.,Djellabi, Ridha.,Montagne, Alex.,...&Weiss, Sabine.(2019).Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed beta-Type Titanium Alloys for Orthopedic Applications.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,28(10),5988-5999. |
MLA | Fellah, Mamoun,et al."Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed beta-Type Titanium Alloys for Orthopedic Applications".JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 28.10(2019):5988-5999. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论