Construction of 3D interconnected diamond networks in Al-matrix composite for high-efficiency thermal management

doi:10.1016/j.cej.2019.122551

CORC > 宁波材料技术与工程研究所 > 中国科学院宁波材料技术与工程研究所 > 2020专题

	Construction of 3D interconnected diamond networks in Al-matrix composite for high-efficiency thermal management
	Zhang, Long ; Wei, Qiuping ; An, Junjie ; Ma, Li ; Zhou, Kechao ; Ye, Wentao ; Yu, Zhiming ; Gan, Xueping ; Lin, Cheng-Te ; Luo, Jingting
刊名	CHEMICAL ENGINEERING JOURNAL
	2020
卷号	380
关键词	PHASE-CHANGE MATERIALS COATED DIAMOND DIAMOND/ALUMINUM COMPOSITES CONDUCTIVITY ENHANCEMENT AL/DIAMOND COMPOSITES FOAM FABRICATION PARTICLES MICROSTRUCTURE PLASMA
DOI	10.1016/j.cej.2019.122551
英文摘要	Realizing high-efficiency thermal management is of great significance for the fast growth of high-performance electronic devices. Herein, three-dimensional (3D) diamond networks (DN) are proposed as highly thermal conducive reinforcements for Al-matrix composite by template-directed chemical vapor deposition (CVD) on Crmodified Cu foams. The diamond networks with dense and uniform structure were further incorporated with pure Al by gas pressure infiltration (GPI). Results showed that the diamond skeletons were uniformly and integrally distributed in the dense Al matrix with a compact interfacial bonding and limited interface product after GPI process. A relatively high thermal conductivity of 315.7 W/mK was achieved at a low diamond loading of 4.6 vol.%, which was equivalent to 54% enhancement compared to pure Al. The synthesized diamond networks with high quality and continuous structure can act as high-efficiency heat transfer pathways to ensure most of heat being transferred through the 3D diamond skeletons, which effectively reduced the phonon-boundary scatterings. As a consequence, the fabricated composite shows a great superiorly in both thermal conductivity and thermal conductivity enhancement efficiency as compared with the conventional Al-matrix composites reinforced with even higher volume fraction of diamond particles. The construction of 3D interconnected diamond networks in metal-matrix composites might open new doors for the design and preparation of high-efficiency thermal management materials.
学科主题	Engineering
内容类型	期刊论文
源URL	[http://ir.nimte.ac.cn/handle/174433/20193]
专题	2020专题
作者单位	1.Zhou, KC (corresponding author), Cent South Univ, Sch Mat Sci & Engn, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China. 2.Ma, L
推荐引用方式 GB/T 7714	Zhang, Long,Wei, Qiuping,An, Junjie,et al. Construction of 3D interconnected diamond networks in Al-matrix composite for high-efficiency thermal management[J]. CHEMICAL ENGINEERING JOURNAL,2020,380.
APA	Zhang, Long.,Wei, Qiuping.,An, Junjie.,Ma, Li.,Zhou, Kechao.,...&Luo, Jingting.(2020).Construction of 3D interconnected diamond networks in Al-matrix composite for high-efficiency thermal management.CHEMICAL ENGINEERING JOURNAL,380.
MLA	Zhang, Long,et al."Construction of 3D interconnected diamond networks in Al-matrix composite for high-efficiency thermal management".CHEMICAL ENGINEERING JOURNAL 380(2020).