mechanicalpropertiesandfrictionbehaviorsofcntalsi10mgcompositesproducedbysparkplasmasintering

	mechanicalpropertiesandfrictionbehaviorsofcntalsi10mgcompositesproducedbysparkplasmasintering
	Wang Linzhi3 ; Liu Ying 2; Wu Jiaojiao3 ; Zhang Xi 1
刊名	矿物冶金与材料学报
	2017
卷号	No.5 期号:5 页码:584
ISSN号	1674-4799
英文摘要	The mechanical properties and friction behaviors of CNT/AlSi_(10)Mg composites produced by spark plasma sintering (SPS) were investigated. The results showed that the densities of the sintered composites gradually increased with increasing sintering temperature and that the highest microhardness and compressive strength were achieved in the specimen sintered at 450°C. CNTs dispersed uniformly in the Al- Si_(10)Mg matrix when the addition of CNTs was less than 1.5wt%. However, when the addition of CNTs exceeded 1.5wt%, the aggregation of CNTs was clearly observed. Moreover, the mechanical properties (including the densities, compressive strength, and microhardness) of the composites changed with CNT content and reached a maximum value when the CNT content was 1.5wt%. Meanwhile, the minimum average friction coefficient and wear rate of the CNT/AlSi_(10)Mg composites were obtained with 1.0wt% CNTs.
语种	英语
内容类型	期刊论文
源URL	[http://119.78.100.138/handle/2HOD01W0/9137]
专题	中国科学院重庆绿色智能技术研究院
作者单位	1.西南交通大学 2.四川大学 3.中国科学院重庆绿色智能技术研究院
推荐引用方式 GB/T 7714	Wang Linzhi,Liu Ying,Wu Jiaojiao,et al. mechanicalpropertiesandfrictionbehaviorsofcntalsi10mgcompositesproducedbysparkplasmasintering[J]. 矿物冶金与材料学报,2017,No.5(5):584.
APA	Wang Linzhi,Liu Ying,Wu Jiaojiao,&Zhang Xi.(2017).mechanicalpropertiesandfrictionbehaviorsofcntalsi10mgcompositesproducedbysparkplasmasintering.矿物冶金与材料学报,No.5(5),584.
MLA	Wang Linzhi,et al."mechanicalpropertiesandfrictionbehaviorsofcntalsi10mgcompositesproducedbysparkplasmasintering".矿物冶金与材料学报 No.5.5(2017):584.