Driving techniques for high frame rate CCD camera (EI CONFERENCE)
Guo W. ; Jin L. ; Xiong J.
2008
会议名称Electronic Imaging and Multimedia Technology V, November 12, 2007 - November 15, 2007
会议地点Beijing, China
关键词This paper describes a high-frame rate CCD camera capable of operating at 100 frames/s. This camera utilizes Kodak KAI-0340 an interline transfer CCD with 640(vertical)480(horizontal) pixels. Two output ports are used to read out CCD data and pixel rates approaching 30 MHz. Because of its reduced effective opacity of vertical charge transfer registers interline transfer CCD can cause undesired image artifacts such as random white spots and smear generated in the registers. To increase frame rate a kind of speed-up structure has been incorporated inside KAI-0340 then it is vulnerable to a vertical stripe effect. The phenomena which mentioned above may severely impair the image quality. To solve these problems some electronic methods of eliminating these artifacts are adopted. Special clocking mode can dump the unwanted charge quickly then the fast readout of the images cleared of smear follows immediately. Amplifier is used to sense and correct delay mismatch between the dual phase vertical clock pulses the transition edges become close to coincident so vertical stripes disappear. Results obtained with the CCD camera are shown.
收录类别EI
内容类型会议论文
源URL[http://ir.ciomp.ac.cn/handle/181722/33825]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式
GB/T 7714
Guo W.,Jin L.,Xiong J.. Driving techniques for high frame rate CCD camera (EI CONFERENCE)[C]. 见:Electronic Imaging and Multimedia Technology V, November 12, 2007 - November 15, 2007. Beijing, China.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace