QQ客服 官方微博 反馈留言

	Structure-property relationship of nano enhanced stereolithography resin for desktop sla 3d printer
	Weng, Zixiang1,3; Zhou, Yu1; Lin, Wenxiong1; Senthil, T.1; Wu, Lixin1,2
刊名	Composites part a-applied science and manufacturing
	2016-09-01
卷号	88页码:234-242
关键词	3d printing Nanocomposites Stereolithography resins Rapid prototyping
ISSN号	1359-835X
DOI	10.1016/j.compositesa.2016.05.035
通讯作者	Wu, lixin(lxwu@fjirsm.ac.cn)
英文摘要	Organically modified nanofillers, including nano sio2, montmorillonite and attapulgite were loaded to stereolithography resin (slr). the surface of nanofillers were modified using organic modifier of 3-(trimethoxysilyl)propyl methacrylate (gamma-mps) and (1-hexadecyl)dimethyl allyl ammonium chloride (c-16-dmaac), and were characterized by ftir and small angle xrd analysis. the morphology of nanocomposites were observed by tem. viscosity and curing speed of slr nanocomposites at increasing nanofillers loading were also studied. the mechanical properties of printed samples fabricated by a home-made stereolithography apparatus (sla) 3d printer were tested. the influence of nanoparticles on the accuracy was measured and discussed. it was found that addition of 5% w/w of nano sio2 increased the tensile strength and modulus by 20.6% and 65.1% respectively, and the printed accuracy was not significantly influenced. this study opens the way to the application of nanocomposites in the desktop level sla 3d printing. (c) 2016 elsevier ltd. all rights reserved.
WOS关键词	EPOXY NANOCOMPOSITES ; IN-SITU ; MECHANICAL-PROPERTIES ; CLAY NANOCOMPOSITES ; UV ; MONTMORILLONITE ; ACRYLATE ; POLYMER ; EXFOLIATION ; ATTAPULGITE
WOS研究方向	Engineering ; Materials Science
WOS类目	Engineering, Manufacturing ; Materials Science, Composites
语种	英语
出版者	ELSEVIER SCI LTD
WOS记录号	WOS:000380081600027
内容类型	期刊论文
URI标识	http://www.corc.org.cn/handle/1471x/2374546
专题	中国科学院大学
通讯作者	Wu, Lixin
作者单位	1.Chinese Acad Sci, Fujian Inst Res Struct Matter, Key Lab Design & Assembly Funct Nanostruct, Fuzhou 350002, Peoples R China 2.Chinese Acad Sci, Fujian Inst Res Struct Matter, Fujian Prov Key Lab Nanomat, Fuzhou 350002, Peoples R China 3.Univ Chinese Acad Sci, Beijing 100049, Peoples R China
推荐引用方式 GB/T 7714	Weng, Zixiang,Zhou, Yu,Lin, Wenxiong,et al. Structure-property relationship of nano enhanced stereolithography resin for desktop sla 3d printer[J]. Composites part a-applied science and manufacturing,2016,88:234-242.
APA	Weng, Zixiang,Zhou, Yu,Lin, Wenxiong,Senthil, T.,&Wu, Lixin.(2016).Structure-property relationship of nano enhanced stereolithography resin for desktop sla 3d printer.Composites part a-applied science and manufacturing,88,234-242.
MLA	Weng, Zixiang,et al."Structure-property relationship of nano enhanced stereolithography resin for desktop sla 3d printer".Composites part a-applied science and manufacturing 88(2016):234-242.

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。