Coordinate-origin calibration of removal function in Magnetorheological Finishing

CORC > 长春光学精密机械与物理研究所 > 中国科学院长春光学精密机械与物理研究所 > 中科院长春光机所知识产出

	Coordinate-origin calibration of removal function in Magnetorheological Finishing
	Zheng, L.-G.; L.-X. Li; X.-K. Wang; D.-L. Xue and X.-J. Zhang
刊名	Guangxue Jingmi Gongcheng/Optics and Precision Engineering
	2017
卷号	25 期号:1
英文摘要	In order to realize determined fabrication by the Magnetorheological Finishing (MRF), the coordinate origin of removal function was calibrated according to the lowest point of polishing wheel. The generation of removal function and the distribution of removing rate were analyzed. Then the coordinate relationship between the lowest point of polishing wheel and the testing probe was deduced by using a standard cylinder, realizing the precise alignment of optical elements. The removal function was tested on special points of the optics, and the coordinate origin of the removal function derived from the lowest point of the polishing pad was calibrated. Furthermore the calibrating error was analyzed clearly. The calibration experiment was performed on the polishing wheel with a diameter of 360 mm, where a circle plane mirror was fabricated with aqueous magnetorheological fluid made of diamond polishing powder. The precision of calibration is up to 0.030 mm. The result indicates that the proposed calibration method is simple and reliable, therefore can meet the demands of the MRF and establish a strong foundation for MRF in optical fabrications. 2017, Science Press. All right reserved.
语种	中文
内容类型	期刊论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/59483]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Zheng, L.-G.,L.-X. Li,X.-K. Wang,et al. Coordinate-origin calibration of removal function in Magnetorheological Finishing[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2017,25(1).
APA	Zheng, L.-G.,L.-X. Li,X.-K. Wang,&D.-L. Xue and X.-J. Zhang.(2017).Coordinate-origin calibration of removal function in Magnetorheological Finishing.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,25(1).
MLA	Zheng, L.-G.,et al."Coordinate-origin calibration of removal function in Magnetorheological Finishing".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 25.1(2017).