Opto-mechanical structure design of visible light rough tracking and imaging lens

CORC > 长春光学精密机械与物理研究所 > 中国科学院长春光学精密机械与物理研究所 > 中科院长春光机所知识产出

	Opto-mechanical structure design of visible light rough tracking and imaging lens
	Wang, H.; S. Dai; L. Fan and Y. Zhao
刊名	Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument
	2017
卷号	38 期号:5
英文摘要	The opto-mechanical structue of 300mm aperture visible light rough tracking and imaging lens was designed for a certain developing ground base optical telescope. The concave mirror structure contouring the rear surface was optimized and the primary mirror weight was reduced by 41.2%. Aiming at the deficiencies of the conventional cementing structure, the new primary mirror supporting structure with elastic compression was adopted. The Patran finite element method (FEM) simulation software was adopted to analyze the accuracy of the primary mirror surface figure with supporting structure at different tilt angle positions and different temperatures. The installation and test scheme was designed, Zygo interferometer was used to test the accuracy of the primary mirror surface figure with supporting structure indoor; and the test result of the surface figure is 0.04 (RMS), the design reference value of the visible light wave length is 0.633 nm and the wavefront aberrations of the optical system both for long-focus lens and short-focus lens are 0.132 (RMS). The test results of the indoor collimator star test, resolution test and outdoor polaris imaging test indicate that the system imaging quality meets the telescope requirement. The results verify the reasonability of the new primary mirror supporting structure and lens opto-mechanical structure design, which provides the design basis and technical path for developing the opto-mechanical structure of similar lenses. 2017, Science Press. All right reserved.
语种	中文
内容类型	期刊论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/59249]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出
推荐引用方式 GB/T 7714	Wang, H.,S. Dai,L. Fan and Y. Zhao. Opto-mechanical structure design of visible light rough tracking and imaging lens[J]. Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument,2017,38(5).
APA	Wang, H.,S. Dai,&L. Fan and Y. Zhao.(2017).Opto-mechanical structure design of visible light rough tracking and imaging lens.Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument,38(5).
MLA	Wang, H.,et al."Opto-mechanical structure design of visible light rough tracking and imaging lens".Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument 38.5(2017).