Thixoforming of AM50 magnesium alloy

doi:10.1007/s00170-016-9495-2

CORC > 重庆绿色智能技术研究院 > 中国科学院重庆绿色智能技术研究院 > 机器人与3D打印技术创新中心

	Thixoforming of AM50 magnesium alloy
	Chen, Tian; Wang, Linzhi; Yang, Jie; Lu, Shengjun
刊名	INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
	2017
卷号	90 期号:2018-05-08 页码:1639-1647
ISSN号	0268-3768
DOI	10.1007/s00170-016-9495-2
通讯作者	Wang, LZ (reprint author), Chinese Acad Sci, Chongqing Key Lab Addit Mfg Technol & Syst, Chongqing Inst Green & Intelligent Technol, Chongqing 400714, Peoples R China.
英文摘要	To obtain AM50 magnesium alloy slurry with fine microstructure, a new process including equal channel angular extrusion (ECAE) and partial remelting treatment has been developed. The evolution of grains from the ECAE-formed AM50 alloy in the semi-solid stage has been studied. Furthermore, thixoforming of ECAE-formed AM50 alloy was conducted, and the mechanical properties of thixoformed components were investigated. Instead of involving dendritic in the as-cast alloy, the microstructure of alloy produced by ECAE contained plenty of recrystallized grains along the deformation direction. During the partial remelting, the liquid phase penetrates not only to the grain boundaries but also to the inside of solid grains. An increase in reheating temperature leads to a corresponding enhanced liquid fracture, and the result improved the degree of spheroidization. Prolonged the holding time, both the solid grains and intragranular liquid droplets had undergone coarsening. The tensile properties of thixoformed from ECAE state are much higher than those from as-cast state. The research encourages the belief that magnesium alloy semi-solid billet with fine and spheroidal grains, which is suitable for semi-solid processing, could be obtained by the combination of ECAE and partial remelting.
语种	英语
WOS记录号	WOS:000400608200033
内容类型	期刊论文
源URL	[http://172.16.51.4:88/handle/2HOD01W0/235]
专题	机器人与3D打印技术创新中心
作者单位	(1) Chinese Acad Sci, Chongqing Key Lab Addit Mfg Technol & Syst, Chongqing Inst Green & Intelligent Technol, Chongqing 400714, Peoples R China
推荐引用方式 GB/T 7714	Chen, Tian,Wang, Linzhi,Yang, Jie,et al. Thixoforming of AM50 magnesium alloy[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,90(2018-05-08):1639-1647.
APA	Chen, Tian,Wang, Linzhi,Yang, Jie,&Lu, Shengjun.(2017).Thixoforming of AM50 magnesium alloy.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,90(2018-05-08),1639-1647.
MLA	Chen, Tian,et al."Thixoforming of AM50 magnesium alloy".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 90.2018-05-08(2017):1639-1647.