Flatness measurement of pitch lap for large continuous polisher

CORC > 上海光学精密机械研究所 > 中国科学院上海光学精密机械研究所 > 中科院强激光材料重点实验室

	Flatness measurement of pitch lap for large continuous polisher
	Liu F(刘方); Gao WL(高文兰); Wang Z(王哲); Xu XK(徐学科); Shao JD(邵建达); Dun AH(顿爱欢); Yang MH(杨明红); Fan YT(范永涛); Fang YY(方媛媛)
刊名	光学精密工程
	2016
期号	12 页码:3048
中文摘要	针对大口径平面光学元件全频谱面形技术指标的高效率、高精度收敛,研究了环形抛光技术。考虑环抛机沥青蜡盘的平面度直接影响工件面形的收敛效率,本文利用准直激光束作为参考,设计研制了测量精度高,重复性精度达到±1μm的大型环抛机抛光蜡盘平面度测量专用装置。分析了环抛过程中蜡盘表面平面度和工件面型PV值之间的变化规律和相关性,根据测量数据得出了蜡盘平面度数据和工件面形的对应关系。实验显示:当平面度和面形曲线相差较大时,工件面形可快速收敛至1λ左右,并由粗抛向精抛工序快速过渡。提出的大型环抛机抛光蜡盘平面度监测装置实
英文摘要	For the high efficient and high accuracy convergence of surface figure of a large aperture workpiece, the continuous polishing technology was investigated. As the convergence efficiency of surface figure of the workpiece was effected directly by the flatness of pitch lap in a continuous polisher, a high precision measurement equipment with repeatability accuracy of ±1 μm was designed and developed for measuring the flatness of the pitch lap. The change rules and correlation between the flatness of pitch lap and the PV value of surface figure for the workpiece were analyzed during continuous polishing, and relationship between the flatness data and the surface figure of the workpiece was obtained based on the measured data. The experiments indicate that when the diference between flatness and surface curve are larger, the shape of the workpiece is rapidly converged to about 1λ, meanwhile the polishing process transits from a rough polishing to a fine polishing. The high precision measurement equipment proposed by the paper implements precise measurement of the flatness for a large wet pitch lap and provides an important technical support for deterministic continuous polishing. ? 2016, Science Press. All right reserved.
资助信息	国家自然科学基金青年科学基金资助项目(No.61605228)
内容类型	期刊论文
源URL	[http://ir.siom.ac.cn/handle/181231/28083]
专题	上海光学精密机械研究所_中科院强激光材料重点实验室
作者单位	中国科学院上海光学精密机械研究所
推荐引用方式 GB/T 7714	Liu F,Gao WL,Wang Z,et al. Flatness measurement of pitch lap for large continuous polisher[J]. 光学精密工程,2016(12):3048.
APA	刘方.,高文兰.,王哲.,徐学科.,邵建达.,...&方媛媛.(2016).Flatness measurement of pitch lap for large continuous polisher.光学精密工程(12),3048.
MLA	刘方,et al."Flatness measurement of pitch lap for large continuous polisher".光学精密工程 .12(2016):3048.