QQ客服 官方微博 反馈留言

	模具钢硬铣削过程振动和声发射信号的监测与分析; Monitoring and Analysis of Vibration and AE Signals in Hard Milling of Mold Steel
	仲为武 ; 王希
	2015-01-15
关键词	模具钢 硬铣削 振动信号 声发射信号 均方根值 快速傅里叶变换 Mold steel Hard milling Vibration signal AE signal RMS value FFT transform
英文摘要	硬切削作为绿色切削的重要组成部分,已成为金属切削的一个研究热点。为了对硬切削过程进行监测,建立了一套信号采集系统,通过该系统采集模具钢铣削过程中的振动信号和声发射信号,并从时域、频域对其进行了分析研究。研究结果表明:模具钢硬铣削过程的振动信号和声发射信号的时域波形呈现不同的特点;振动信号和声发射信号的均方根值随切削速度的增大均呈明显的增大趋势,而受每齿进给量和铣削深度影响很小;随着切削速度的提高,振动信号各频段的幅值均增大,但频谱分布基本不变;随切削速度的提高,声发射信号的频谱成分增多,并导致了均方根值的增大。; Hard milling is one of the main green machining processes,and it has become a research hot-point.In order to monitoring hard milling process,a signal acquisition system was built.Vibration signals and AE signals were sampled in mold steel milling process.Analysis of sampled signals was conducted through time domain and frequency domain.The research shows that the time domain waveforms are different between vibration signals and AE signals in milling process; higher cutting speed results in bigger RMS values,feed per tooth and cutting depth have less effect on vibration and AE signals; higher cutting speed results in increase of amplitude in all frequency bands of vibration signals; higher cutting speed results in increase of component of frequency,which results in increase of RMS values.; 国家自然科学基金资助项目(50875120)
语种	zh_CN
内容类型	期刊论文
源URL	[http://dspace.xmu.edu.cn/handle/2288/105941]
专题	航空航天－已发表论文
推荐引用方式 GB/T 7714	仲为武,王希. 模具钢硬铣削过程振动和声发射信号的监测与分析, Monitoring and Analysis of Vibration and AE Signals in Hard Milling of Mold Steel[J],2015.
APA	仲为武,&王希.(2015).模具钢硬铣削过程振动和声发射信号的监测与分析..
MLA	仲为武,et al."模具钢硬铣削过程振动和声发射信号的监测与分析".(2015).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。