CORC  > 厦门大学  > 化学化工-已发表论文
Electrophoretic deposition of hydroxyapatite nano coating on etched titanium surface
F. Chen ; L.W. Lin ; Chang Jian Lin ; Lin CJ(林昌健) ; W.W. Lu
2005-06
关键词nano coatings hydroxyapatite electrophoretic deposition bonding strength
英文摘要Hydroxyapatite (Ca,O(PO4)(6)(OH)(2), HAp) is biocompatible and bioactive, however, it is relatively brittle. The development of HAp coatings on medical metal surface is a good way to improve the mechanical properties of HAp. In the present study, a HAp coating with nano-structure on a roughened titanium surface was developed by electrophoretic deposition process. To decrease sintering temperature HAp nanoparticles synthesized by a wet chemical method was used. It was observed that the coating was uniform and showed no cracks. After sintering the HAp coating still remained nano structured. The surface treatment of Ti was applied to form a distribution of small pits and a TiO2 thin layer on the Ti surface that improves the adhesion of coating to the Ti substrate. It was shown that the bonding strength of coating was 18 +/- 2.5 MPa. The hardness and Young's modulus were 40.6 and 0.42 GPa, respectively.
语种英语
出版者TRANS TECH PUBLICATIONS LTD
内容类型期刊论文
源URL[http://dx.doi.org/doi:10.4028/www.scientific.net/KEM.288-289.183]  
专题化学化工-已发表论文
推荐引用方式
GB/T 7714
F. Chen,L.W. Lin,Chang Jian Lin,et al. Electrophoretic deposition of hydroxyapatite nano coating on etched titanium surface[J],2005.
APA F. Chen,L.W. Lin,Chang Jian Lin,林昌健,&W.W. Lu.(2005).Electrophoretic deposition of hydroxyapatite nano coating on etched titanium surface..
MLA F. Chen,et al."Electrophoretic deposition of hydroxyapatite nano coating on etched titanium surface".(2005).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace