CORC  > 厦门大学  > 材料学院-已发表论文
微乳液聚合制备含氟丙烯酸酯共聚物; Preparation of Fluoroalkyl Acrylate Copolymer by Microemulsion Polymerization
黄永毅 ; 李毅伟 ; 曾小兰 ; 吕莉 ; 林国良
2011
关键词丙烯酸全氟己基乙基酯 微乳液聚合 憎水 丙烯酸酯 fluoroalkyl acrylate microemulsion polymerization hydrophobic acrylate fluorine
英文摘要以十二烷基磺酸钠和十三异构醇聚氧乙烯醚为复合乳化剂,采用半连续滴加预乳化单体与引发剂,微乳液聚合的方法制备了丙烯酸全氟己基乙基酯(PfEA)、丙烯酸丁酯和甲基丙烯酸甲酯共聚物.考察了PfEA、乳化剂的质量分数和温度等因素对微乳液聚合及共聚物性能的影响.研究结果表明,当乳化剂质量分数在2%~3%,PfEA质量分数在12%~20%,聚合温度在75~80℃时,聚合反应稳定,且制得的共聚物憎水性优异.; The fluoroalkyl acrylate copolymer was prepared by semicontinuing microemulsion polymerization using sodium dodecyl sulfate and isotridecyl alcohol polyoxyethylene ether as emulsifier.The effect of emulsifier content,flurorinated mononer content and polymerization temperature on the stability of the polymerization and the properties of the copolymer was discussed.The results suggest that the polymerization has good stability when the emulsifier content is 2%-3%,the flurorinated mononer content is 12%-20% and the polymerization is 75-80 ℃.Simultaneously,the copolymer film exhibits excellent water resistance.
语种zh_CN
内容类型期刊论文
源URL[http://dspace.xmu.edu.cn/handle/2288/98385]  
专题材料学院-已发表论文
推荐引用方式
GB/T 7714
黄永毅,李毅伟,曾小兰,等. 微乳液聚合制备含氟丙烯酸酯共聚物, Preparation of Fluoroalkyl Acrylate Copolymer by Microemulsion Polymerization[J],2011.
APA 黄永毅,李毅伟,曾小兰,吕莉,&林国良.(2011).微乳液聚合制备含氟丙烯酸酯共聚物..
MLA 黄永毅,et al."微乳液聚合制备含氟丙烯酸酯共聚物".(2011).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace