直动从动杆圆锥凸轮机构的最佳推程、回程运动角Optimum{Φ0,Φ′0}及其求解方法

CORC > 集美大学

	直动从动杆圆锥凸轮机构的最佳推程、回程运动角Optimum{Φ0,Φ′0}及其求解方法
	常勇 ; 王知行
刊名	http://epub.edu.cnki.net/grid2008/brief/detailj.aspx?filename=jxsj200205007&dbcode=CJFQ&dbname=CJFQ2002
	2012-06-05 ; 2012-06-05
关键词	圆锥凸轮机构基圆半径推程运动角回程运动角最佳分配 Conical cam mechanism Base circle radius Moving angle of push travel Moving angle of return travel Optimum distribution TH112.2
其他题名	Optimum moving angles of push travel and return travel optimum{Φ0,Φ′0}and its solving method for conical cam mechanism with translating follower
中文摘要	在推程、回程运动角之和Φ0 +Φ′0 =C(定值 )的情况下 ,必存在某一对推程、回程运动角的最佳分配Optimum {Φ0 ,Φ′0 };当选用该最佳分配时 ,直动从动杆圆锥凸轮基圆半径r0 取得其最小值r0min。在发现、揭示出上述事实的基础上 ,研究解决了当选取最佳分配Optimum{Φ0 ,Φ′0 }时 ,按许用压力角条件求解直动从动杆圆锥凸轮基圆半径最小值r0min 的解析方法。; Under the situation of the sum of moving angles of push travel and of return travel to be a constent, Φ 0+ Φ ′ 0= C (constant),there will certainly exist an optimum distribution of a certain pair of moving angle of push travel and return travel optimun { Φ 0, Φ ′ 0}.When this optimum distribution is being selected,the radius of base circle r 0 of conical cam with translating follower will gain its minimum value r 0min .On the basis of discovering and revealing the above stated fact,this paper studied and settled the analytical method of solving the minimum value of base circle radius of conical cam with translating follower r 0min according to the condition of allowable pressure angle when the optimum distribution optimum { Φ 0, Φ ′ 0} is being selected.; 【作者单位】集美大学机械工程学院；哈尔滨工业大学机电学院福建厦门361021；黑龙江哈尔滨150001；【作者英文名】CHANG Yong et al (Mechanical Engineering Institute,Jimei University,Fujian Xiamen,361021,China)
语种	中文
内容类型	期刊论文
源URL	[http://ir.calis.edu.cn/hdl/235041/14342]
专题	集美大学
推荐引用方式 GB/T 7714	常勇,王知行. 直动从动杆圆锥凸轮机构的最佳推程、回程运动角Optimum{Φ0,Φ′0}及其求解方法[J]. http://epub.edu.cnki.net/grid2008/brief/detailj.aspx?filename=jxsj200205007&dbcode=CJFQ&dbname=CJFQ2002,2012, 2012.
APA	常勇,&王知行.(2012).直动从动杆圆锥凸轮机构的最佳推程、回程运动角Optimum{Φ0,Φ′0}及其求解方法.http://epub.edu.cnki.net/grid2008/brief/detailj.aspx?filename=jxsj200205007&dbcode=CJFQ&dbname=CJFQ2002.
MLA	常勇,et al."直动从动杆圆锥凸轮机构的最佳推程、回程运动角Optimum{Φ0,Φ′0}及其求解方法".http://epub.edu.cnki.net/grid2008/brief/detailj.aspx?filename=jxsj200205007&dbcode=CJFQ&dbname=CJFQ2002 (2012).