圆锥形中空钢管混凝土叠合短柱试验研究 | |
任庆新 ; 孙明海 ; 贾连光 ; REN Qing-xin ; SUN Ming-hai ; JIA Lian-guang | |
2016-03-30 ; 2016-03-30 | |
关键词 | 圆形截面 中空钢管混凝土叠合柱 短柱 锥形柱 承载力计算式 South-to-North water diversion water hammer valve closing TU398.9 |
其他题名 | TESTS ON CIRCULAR TAPERED HOLLOW STEEL TUBE REINFORCED CONCRETE STUB COLUMNS |
中文摘要 | 该文对12个圆锥形中空钢管混凝土叠合短柱进行了轴压试验,探讨了锥度、截面直径及是否内置钢管对圆锥形中空钢管混凝土叠合短柱轴压力学性能的影响,建议了圆锥形中空钢管混凝土叠合短柱轴压承载力计算式。结果表明:锥度、截面直径及是否内置钢管对圆锥形中空钢管混凝土叠合短柱轴压性能影响显著;建议的极限承载力计算式计算结果与试验结果总体上吻合较好,可用来预测圆锥形中空钢管混凝土叠合短柱的截面抗压强度。; A total of 12 circular tapered hollow sreel tube reinforced concrete stub columns subjected to axial compression were tested. The main parameters were the tapered angle, the diameter of a crossing section and with or without embedding a hollow steel tube. The influences of different parameters on the compressive mechanical properties of these specimens are discussed. Based on this, a simplified formula is put forward to calculate stub column bearing capacity. The test results show that the influence of the three parameters on the compressive specimens are very obvious, and the calculated results show a good agreement with the experimental results, and the formula can reasonably evaluate the ultimate bearing capacity of circular tapered hollow steel tubes reinforced concrete stub columns. |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/149133] ![]() |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 任庆新,孙明海,贾连光,等. 圆锥形中空钢管混凝土叠合短柱试验研究[J],2016, 2016. |
APA | 任庆新,孙明海,贾连光,REN Qing-xin,SUN Ming-hai,&JIA Lian-guang.(2016).圆锥形中空钢管混凝土叠合短柱试验研究.. |
MLA | 任庆新,et al."圆锥形中空钢管混凝土叠合短柱试验研究".(2016). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论