制浆造纸废水絮凝/Fenton深度处理工程应用的技术经济性分析 | |
刘晋恺 ; 时孝磊 ; 胡洪营 ; LIU Jin-kai ; SHI Xiao-lei ; HU Hong-ying | |
2016-03-30 ; 2016-03-30 | |
关键词 | 制浆造纸废水 深度处理 絮凝/Fenton法 技术经济分析 pulp and papermaking wastewater advanced treatment flocculation Fenton X793 |
其他题名 | Technical and economic analysis on flocculation/Fenton process for advanced treatment of pulping and papermaking wastewater |
中文摘要 | 根据某大型造纸企业废水处理厂深度处理工艺的运行数据,评价了"絮凝/Fenton"深度处理工艺对制浆造纸废水有机物的处理效果,同时分析了该工艺的运行费用。结果表明:制浆造纸废水二级出水经该工艺处理后,出水COD最优水平值(Technology Achievable Limit,TAL-3.84%)可达43mg/l,出水COD保证值(TAL-95%)为56mg/l,保证值可以满足《山东省海河流域水污染物综合排放标准》的排水要求。COD去除率最优值(TAL-3.84%)为88.3%,去除率保证值(TAL-95%)为83.7%。COD去除率稳定,适合作为制浆造纸废水处理的末端保障工艺。该深度处理工艺的平均成本为1.46元/m3,成本主要分布在1.21~1.71元/m3范围内。运行成本中,药剂费用所占比例最大,约为60%。; The treatment performance and cost of a "Fenton/flocculation" process were analyzed based on the operation data of a wastewater treatment plant of a large pulp and paper enterprise. The results show that the optimal level(TAL-3.84%) of the effluent COD is 43mg/l, and the guaranteed value(TAL-95%) 56 mg/l when treated by fl occulation/Fenton process, which can meet the integrated water pollutant discharge standard for Haihe river basin, in Shandong Province. The optimal value(TAL-3.84%) and the guaranteed value(TAL-95%) of COD removal rate were 88.3% and 83.7%, respectively. Average cost of the advanced process was 1.46 yuan/m3, and the cost ranged from 1.21~1.71yuan /m3, with the cost of chemicals accounting for 60%. |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/148303] ![]() |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 刘晋恺,时孝磊,胡洪营,等. 制浆造纸废水絮凝/Fenton深度处理工程应用的技术经济性分析[J],2016, 2016. |
APA | 刘晋恺,时孝磊,胡洪营,LIU Jin-kai,SHI Xiao-lei,&HU Hong-ying.(2016).制浆造纸废水絮凝/Fenton深度处理工程应用的技术经济性分析.. |
MLA | 刘晋恺,et al."制浆造纸废水絮凝/Fenton深度处理工程应用的技术经济性分析".(2016). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论