QQ客服 官方微博 反馈留言

	结合实际刻蚀数据的离子刻蚀产额优化建模方法
	高扬福 ; 孙晓民 ; 宋亦旭 ; 阮聪 ; Gao Yang-Fu ; Sun Xiao-Min ; Song Yi-Xu ; Ruan Cong
	2016-03-30 ; 2016-03-30
关键词	实际刻蚀数据 刻蚀产额模型 刻蚀速率 多目标进化算法 interdisciplinary cross-innovation construction and management of laboratory achievements in scientific research clean production TN305.7
其他题名	An optimization method for ion etching yield modeling combined with factual etching data
中文摘要	刻蚀表面仿真是研究等离子体刻蚀工艺过程机理的重要手段.在刻蚀表面仿真方法中,刻蚀表面演化模型和离子刻蚀产额模型直接决定了刻蚀表面演化结果.但现有的刻蚀表面演化模型不够精确,且目前离子刻蚀产额模型主要来自分子动力学仿真和物理实验,而实际加工过程十分复杂,等效的离子刻蚀产额包含很多因素.针对这些问题,首先对当前的刻蚀表面演化模型进行改进,同时重新定义了离子刻蚀产额模型的优化目标,并利用实际刻蚀加工数据来优化离子刻蚀产额模型.为缩短优化模型所用时间,采用并行方法来加速优化过程.最后,将得到的离子刻蚀产额模型参数应用于采用元胞自动机法的刻蚀工艺实际仿真过程中.实验结果表明,该优化建模方法确实提高了仿真的精确度,同时优化过程所用时间也大大减少.; The profile surface simulation is an important method to study the ion etching mechanism. In profile surface simulation, the result of surface evolution is primarily determined by the surface evolution model and the etching yield optimization model as well. However, the currently available surface evolution model is not accurate enough. What's more, most of the data used in etching yield optimization model are based on simulation, while no factual data are used to optimize the parameters of ion etching yield model. In order to solve these problems, the accuracy of current evolution model is improved, the optimal objects of etching yield model are redefined, and the factual etching data are introduced to optimize the etching yield model for the first time. In this paper, parallel method is also adopted to speed up the optimization process, whose optimized parameters are then applied to the etching simulation process that is based on cellular automata. The experimental results show that our proposed approach does improve the accuracy of simulation and greatly shorten the optimization process.
语种	中文 ; 中文
内容类型	期刊论文
源URL	[http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/146958]
专题	清华大学
推荐引用方式 GB/T 7714	高扬福,孙晓民,宋亦旭,等. 结合实际刻蚀数据的离子刻蚀产额优化建模方法[J],2016, 2016.
APA	高扬福.,孙晓民.,宋亦旭.,阮聪.,Gao Yang-Fu.,...&Ruan Cong.(2016).结合实际刻蚀数据的离子刻蚀产额优化建模方法..
MLA	高扬福,et al."结合实际刻蚀数据的离子刻蚀产额优化建模方法".(2016).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。