铜基镍纳米锥表面喷雾冷却的实验研究 | |
陈剑楠 ; 张震 ; 高雪峰 ; 姜培学 ; CHEN Jian-Nan ; ZHANG Zhen ; GAO Xue-Feng ; JIANG Pei-Xue | |
2016-03-30 ; 2016-03-30 | |
关键词 | 喷雾冷却 镍纳米锥表面 接触角 spray cooling nanocone-structured surface contact angle TK124 |
其他题名 | Experimental Investigation of Spray Cooling on Nickel Nanocone-Structured Surface |
中文摘要 | 本文实验研究了镜面抛光铜表面和两组不同高度镍纳米锥表面的喷雾冷却换热特性。接触角的实验与分析发现,纳米锥表面的接触角远小于抛光铜表面,且纳米锥高度越高,接触角越小。三组表面在喷雾冷却单相换热区换热性能相近,抛光铜表面换热性能略优。纳米锥表面在喷雾冷却两相换热区展现出更强的换热性能,且纳米锥高度越高,接触角越小,换热性能越好,CHF越高。; Heat transfer during spray cooling on polished cooper surface and two nickel nanoconestructured surfaces with different nanocone height was studied experimentally.Contact angle of water on nanocone-structured surfaces are smaller than that on polished cooper surface and higher nanocone results in smaller contact angle on the surface.No obvious difference is observed in single-phase regime while polished cooper surface has the slightly better heat transfer performance.Nanocone-structured surfaces exhibit higher heat transfer performance in two-phase regime.And higher nanocone results in better heat transfer performance and higher CHF. |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://ir.lib.tsinghua.edu.cn/ir/item.do?handle=123456789/144971] |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 陈剑楠,张震,高雪峰,等. 铜基镍纳米锥表面喷雾冷却的实验研究[J],2016, 2016. |
APA | 陈剑楠.,张震.,高雪峰.,姜培学.,CHEN Jian-Nan.,...&JIANG Pei-Xue.(2016).铜基镍纳米锥表面喷雾冷却的实验研究.. |
MLA | 陈剑楠,et al."铜基镍纳米锥表面喷雾冷却的实验研究".(2016). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论