A study of the integrated composite material structures under different fabrication processing | |
Li, Jun ; Yao, Xuefeng ; Liu, Yinghua ; Cen, Zhangzhi ; Kou, Zhejun ; Dai, Di | |
2010-10-12 ; 2010-10-12 | |
关键词 | Residual/internal stress Analytical modeling Cure Integrated structures INDUCED RESIDUAL-STRESS PROCESS-INDUCED DEFORMATION FINITE-ELEMENT-ANALYSIS THERMOVISCOELASTIC ANALYSIS MODEL PREDICTION ACCURACY CURE Engineering, Manufacturing Materials Science, Composites |
中文摘要 | Based on the typical T-shaped integrated structures, three manufacturing schemes, such as co-cure, co-bonding and secondary bonding, are discussed in this paper. In the curing process of composite T-shaped integrated structures, the mechanism of the warpage deformation and internal stresses are analyzed, and a theoretical model is established. Some important curing mechanical properties of the T-shaped integrated structures are evaluated using the finite element method, including the internal temperature and the degree of cure, the warpage deformation and the internal stresses due to the internal exothermic chemical reaction and the volumetric shrinkage. The evolutions of material parameters are also considered while the degree of cure varied. And the relationships among the different manufacture schemes, the warpage deformation and internal stresses are studied. The results show that both warpage deformation and internal stresses are closely correlated with the fabrication process and the selection of different fabrication process can prominently reduce the warpage deformation and the internal stresses. Crown Copyright (C) 2009 Published by Elsevier Ltd. All rights reserved. |
语种 | 英语 ; 英语 |
出版者 | ELSEVIER SCI LTD ; OXFORD ; THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/79199] ![]() |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | Li, Jun,Yao, Xuefeng,Liu, Yinghua,et al. A study of the integrated composite material structures under different fabrication processing[J],2010, 2010. |
APA | Li, Jun,Yao, Xuefeng,Liu, Yinghua,Cen, Zhangzhi,Kou, Zhejun,&Dai, Di.(2010).A study of the integrated composite material structures under different fabrication processing.. |
MLA | Li, Jun,et al."A study of the integrated composite material structures under different fabrication processing".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论