CORC  > 清华大学
The dynamic properties of SiCp/Al composites fabricated by spark plasma sintering with powders prepared by mechanical alloying process
Zhang, Jiangtao ; Shi, Huiji ; Cai, Mingchun ; Liu, Lisheng ; Zhai, Pengcheng
2010-10-12 ; 2010-10-12
关键词Dynamic compressive properties Spark plasma sintering Mechanical alloying Al matrix composites Strain rate Damage METAL-MATRIX COMPOSITES PARTICLE-REINFORCED ALUMINUM CONSOLIDATION COMPRESSION STRENGTH AL2O3 MMCS Nanoscience & Nanotechnology Materials Science, Multidisciplinary
中文摘要The dynamic compressive properties of SiC particle reinforced pure AI matrix composites, fabricated by spark plasma sintering technique with mixture powders prepared by mechanical alloying process, were tested in this paper. Two different average SiC particle sizes of 12 mu m and 45 mu m were adopted, and the compressive tests of these composites at strain rates ranging from 800/s to 5200/s were conducted by split Hopkinson pressure bar. The damage mechanism of the SiCp/Al composites was analyzed through the microstructural observations and high-precision density measurements. Results show that the dynamic properties and damage accumulation of these composites are significantly affected by the particle distribution, size, particle cracking, particle/matrix interface debonding and adiabatic heat softening. The composites containing smaller SiC particles exhibit higher flow stress, lower strain rate sensitivity, and less damage at high strain rate deformation. (C) 2009 Elsevier B.V. All rights reserved.
语种英语 ; 英语
出版者ELSEVIER SCIENCE SA ; LAUSANNE ; PO BOX 564, 1001 LAUSANNE, SWITZERLAND
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/79143]  
专题清华大学
推荐引用方式
GB/T 7714
Zhang, Jiangtao,Shi, Huiji,Cai, Mingchun,et al. The dynamic properties of SiCp/Al composites fabricated by spark plasma sintering with powders prepared by mechanical alloying process[J],2010, 2010.
APA Zhang, Jiangtao,Shi, Huiji,Cai, Mingchun,Liu, Lisheng,&Zhai, Pengcheng.(2010).The dynamic properties of SiCp/Al composites fabricated by spark plasma sintering with powders prepared by mechanical alloying process..
MLA Zhang, Jiangtao,et al."The dynamic properties of SiCp/Al composites fabricated by spark plasma sintering with powders prepared by mechanical alloying process".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace