多轴激光加工机床控制参数评估和调节技术 | |
张永强 ; 陈武柱 ; 张旭东 ; Zhang Yongqiang ; Chen Wuzhu ; Zhang Xudong | |
2010-07-19 ; 2010-07-19 | |
关键词 | 激光加工 离线 机床 数控 控制参数 laser processing off line machine tool NC control parameter TG665 |
其他题名 | Evaluation and Adjustment of Controlling Parameters for Multi-axis Laser Processing Machine |
中文摘要 | 多轴数控系统运动轨迹是各轴协同作用的结果,而常规控制参数调节方法仅对各轴控制参数进行独立调节。针对这一问题,提出了在多轴系统中各轴两两配合进行圆轨迹输出,以圆度误差作为量化指标评估多轴配合情况的方法。在此基础上,给出了多轴机床控制参数调节的技术方案。此项技术具有精度高、操作简单、成本低的特点,被成功应用在多轴开放式激光加工数控系统中,获得了满意的效果。; For the conventional method of independently adjusting controlling parameters in multi-axis laser processing machine,it is difficult to guarantee the processing accuracy when performing large curvature trace or at high processing speed.This paper presented a new control method,which performed a circular path and calculated the roundness tolerances as the quantitative degree of adaptability between every two axles.Based on the roundness tolerances,a fully off-line parameter-adjustment technology for multi-axis system was developed,which has the characteristics of high accuracy,simple operation and low cost.This technology has been applied in open multi-axis laser processing NC system successfully.; 国家自然科学基金资助项目(50175061); 清华大学985基金资助项目(012-101050) |
语种 | 中文 ; 中文 |
内容类型 | 期刊论文 |
源URL | [http://hdl.handle.net/123456789/77028] ![]() |
专题 | 清华大学 |
推荐引用方式 GB/T 7714 | 张永强,陈武柱,张旭东,等. 多轴激光加工机床控制参数评估和调节技术[J],2010, 2010. |
APA | 张永强,陈武柱,张旭东,Zhang Yongqiang,Chen Wuzhu,&Zhang Xudong.(2010).多轴激光加工机床控制参数评估和调节技术.. |
MLA | 张永强,et al."多轴激光加工机床控制参数评估和调节技术".(2010). |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论