QQ客服 官方微博 反馈留言

	核化沸腾液滴的铺展实验观察
	陆规 ; 彭晓峰 ; 王晓东 ; LU Gui ; PENG Xiao-feng ; WANG Xiao-dong
	2010-07-19 ; 2010-07-19
关键词	液滴 蒸发 湿润 接触角 铺展 droplet evaporation wetting contact angle spreading TK124
其他题名	Experimental investigation on spreading of droplets with evaporation and nucleation
中文摘要	采用高速摄像技术可视化观察10μL液滴在不同固体表面上的蒸发及核化过程,壁面温度110~190℃。通过测量小液滴铺展面积、铺展速率,确认液滴在蒸发沸腾情况下受迫铺展与其内部气泡动态演化关系密切,也受加热板表面特性影响。130℃时液滴最容易铺展,铺展趋势随表面粗糙度增大而加强。160℃时液滴各板面液滴铺展的速度和面积非常相近。160℃以后液滴的铺展趋势与温度较低时相反,金属板越光滑越容易铺展。; An experimental investigation was conducted to visually observe the dynamical characteristics of water droplets with evaporation and nucleation on stainless steel and polished silicon surfaces.The water droplet diameter,spreading area and spreading speed were measured using a high-speed CCD camera at the surface temperature ranged from 110 ℃ to 190 ℃.The spreading of water droplets under evaporation and nucleate boiling has a close relationship with the dynamic bubble behaviors in the droplet as well as the surface properties.Both the drag of spreading area and spreading speed are highly dependent upon the surface temperature and surface properties.Water droplets is the easiest to spread at the surface temperature of 130 ℃,and the spreading tendency increased with increasing surface coarseness.Particularly,both bubble volume and bubble interaction have very strong influence on droplet spreading.For the cases with the surface temperature greater than 160 ℃,the spreading tendency increase with increasing surface lubricity,which was opposite to the lower surface temperature.The periodic evaporation and nucleation of a droplet on the polished silicon surfaces was also observed in the experiments.; 国家自然科学基金重点支持项目(50406001)
语种	中文 ; 中文
内容类型	期刊论文
源URL	[http://hdl.handle.net/123456789/76082]
专题	清华大学
推荐引用方式 GB/T 7714	陆规,彭晓峰,王晓东,等. 核化沸腾液滴的铺展实验观察[J],2010, 2010.
APA	陆规,彭晓峰,王晓东,LU Gui,PENG Xiao-feng,&WANG Xiao-dong.(2010).核化沸腾液滴的铺展实验观察..
MLA	陆规,et al."核化沸腾液滴的铺展实验观察".(2010).

个性服务

查看访问统计

相关权益政策

暂无数据

收藏/分享

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。