| 基于结合面的龙门五面加工中心虚拟建模及静刚度研究 | |
| 刘悦 ; 王立平 ; 关立文 ; 刘景袆 ; Liu Yue ; Wang Liping ; Guan Liwen | |
| 2010-07-19 ; 2010-07-19 | |
| 关键词 | 静刚度 实体建模 有限元分析 弹簧单元 static rigidity, physical modeling, finite element analysis, spring element TG659 |
| 其他题名 | Study on Virtual Modeling and Static Rigidity of 5-faces Portal-type MC Based on Interface |
| 中文摘要 | 静刚度是机床性能的重要指标,有必要在设计阶段对其进行预估。针对正在设计中的Linear MC6000型龙门五面加工中心机床,在CAD软件UGNX2.0环境中建立了其各部件及整机的三维实体模型。在有限元分析软件ABAQUS6.51环境中,用弹簧单元来模拟滑块与直线导轨的接触刚度,建立了机床的有限元模型,并对其静刚度进行了分析。; The static rigidity is an important index of machine tool's performance, which should be forecasted in the planning phase. Based on UG NX 2.0 developing environment, the 3-D physical models for components and complete machine of Linear MC6000, a 5-faces portal-type MC in designing, were established. Based on ABAQUS 6.51 environment, the contacting rigidity between slide block and linear guideway was simulated with spring elements, the finite element model of the machine tool was set up, and the static rigidity of the machine tool was analyzed.; 国家高技术研究发展计划(863计划)重点资助项目(项目编号:2005AA424220) |
| 语种 | 中文 ; 中文 |
| 内容类型 | 期刊论文 |
| 源URL | [http://hdl.handle.net/123456789/75622]  |
| 专题 | 清华大学 |
| 推荐引用方式 GB/T 7714 | 刘悦,王立平,关立文,等. 基于结合面的龙门五面加工中心虚拟建模及静刚度研究[J],2010, 2010. |
| APA | 刘悦.,王立平.,关立文.,刘景袆.,Liu Yue.,...&Guan Liwen.(2010).基于结合面的龙门五面加工中心虚拟建模及静刚度研究.. |
| MLA | 刘悦,et al."基于结合面的龙门五面加工中心虚拟建模及静刚度研究".(2010). |
| 个性服务 |
| 查看访问统计 |
| 相关权益政策 |
| 暂无数据 |
| 收藏/分享 |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论