CORC  > 清华大学
涡轮盘风冷过程数值模拟研究
邹金文 ; 刘东 ; 柳百成 ; 沈厚发 ; ZOU Jin-wen ; LIU Dong ; LIU Bai-cheng ; SHEN Hou-fa
2010-07-19 ; 2010-07-19
关键词涡轮盘 热处理 模拟 turbine disk heat treatment simulate V263.1
其他题名Simulation of Wind Chill Process for Turbine Disk
中文摘要采用商用CFD分析软件Fluent对涡轮盘固溶处理后的风冷过程进行了数值模拟研究,定量分析了盘件内温度、冷速等参数的分布情况。模拟结果显示,单风扇风冷过程中盘件沿径向和周向的温度分布较三风扇冷却方式均匀。两种形式风冷过程的风场结果表明,单风扇冷却时盘件表面的冷却速度较高。; The wind chill process for FGH96 turbine disk was simulated and studied by using the commercial CFD software.The distribution of parameters such as temperature and cooling rate were analyzed quantitatively.The results showed that the temperature distribution in radial and circumferential directions of disk was more homogeneous in the case using single fan than that in the case using three fans.The results of wind field showed that the cooling rate when using single fan was higher.
语种中文 ; 中文
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/75133]  
专题清华大学
推荐引用方式
GB/T 7714
邹金文,刘东,柳百成,等. 涡轮盘风冷过程数值模拟研究[J],2010, 2010.
APA 邹金文.,刘东.,柳百成.,沈厚发.,ZOU Jin-wen.,...&SHEN Hou-fa.(2010).涡轮盘风冷过程数值模拟研究..
MLA 邹金文,et al."涡轮盘风冷过程数值模拟研究".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace