CORC  > 清华大学
质子交换膜燃料电池的电压测试
包磊 ; 李中 ; 卢兰光 ; 欧阳明高 ; Bao Lei ; Li Zhong ; Lu Languang ; Ouyang Minggao
2010-07-15 ; 2010-07-15
会议名称中国汽车工程学会汽车电子技术分会第七届(2006)年会暨学术研讨会论文集 ; 中国汽车工程学会汽车电子技术分会第七届(2006)年会暨学术研讨会 ; 中国山东青岛 ; CNKI ; 中国汽车工程学会汽车电子技术分会、弗戈工业媒体—AI《汽车制造业》
关键词燃料电池 质子交换膜 电池电压 数据采集 Fuel cell PEM chip voltage measurement U473.4
其他题名Measurement of Fuel Cell Chip Voltage
中文摘要电池电压是反映燃料电池性能的综合指标之一,本文呈现了用于质子交换膜燃料电池实验的电压巡检系统的设计。本系统使用8051和MC68376作为数字核心,使用CAN作为通讯协议.能够实现燃料电池单片电压的采集、分析、发送、报警等功能,目前本系统已经集成到本单位的燃料电池发动机测试台架。燃料电池发动机测试台架于今年2月通过国家“十五”计划验收, 目前工作正常。; Chip voltage is one of the criteria in evaluating fuel cell performance. In this article the electronic design of fuel cell chip voltage monitor system is discussed. The system uses 8051 and MC68376 as MCU and the communication follows CAN protocol. With this system the measurement, analysis, sending and alarming of the chip voltages are realized. The chip voltage monitor system has been assemble to our fuel cell engine test platform, which is inspected and accepted as one of the subproject of Key Technologies Research and Development Program of China during the 10th Five-Year Plan Period. The fuel cell system is now operating properly.
语种中文 ; 中文
内容类型会议论文
源URL[http://hdl.handle.net/123456789/67585]  
专题清华大学
推荐引用方式
GB/T 7714
包磊,李中,卢兰光,等. 质子交换膜燃料电池的电压测试[C]. 见:中国汽车工程学会汽车电子技术分会第七届(2006)年会暨学术研讨会论文集, 中国汽车工程学会汽车电子技术分会第七届(2006)年会暨学术研讨会, 中国山东青岛, CNKI, 中国汽车工程学会汽车电子技术分会、弗戈工业媒体—AI《汽车制造业》.
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace