| 预测全级配大坝混凝土弹性模量的三相模型 | |
| 郑丹 ; 李文伟 ; ZHENG Dan ; LI Wen-wei | |
| 2010-06-10 ; 2010-06-10 | |
| 关键词 | 水工混凝土 全级配 湿筛 弹性模量 hydraulic concrete full grade wet sieving elastic modulus TV431 |
| 其他题名 | Three-phase model for predicting elastic modulus of full-grade dam concrete |
| 中文摘要 | 在分析传统混凝土两相复合材料弹性模量计算模型不足的基础上,考虑混凝土中界面过渡区的影响,分析界面过渡区的体积与骨料体积分数、骨料颗粒级配和界面过渡区厚度之间的关系,建立预测混凝土弹性模量的三相复合材料模型,并在此基础上计算全级配混凝土与湿筛混凝土的弹性模量,并与已有试验结果进行比较,吻合良好。分析全级配与湿筛混凝土弹性模量比值与骨料及水泥基体弹性模量比值的关系,给出了随龄期变化时两者弹性模量比值的变化规律。; Based on the shortcomings of the existing traditional two-phase model of elastic modulus for two-phase composites,and considering the influence of the interface transition zone(ITZ) in concrete,the relationships between volume percent of ITZ and aggregate and the thickness of ITZ and aggregate grading are analyzed.A three-phase model for predicting the elastic modulus is established. The elastic modulus of full-grade and wet sieving concrete were calculated with this model,and the results are in good agreement with existing experimental results.The relationship between the ratio of a full-grade concrete elastic modulus and a wet sieving concrete elastic modulus and the ratio of the aggregate elastic modulus and cement matrix elastic modulus were studied.The change law of the elastic modulus ratio is given when the age of concrete changes.; 国家自然科学基金(50779028); 中国博士后科学基金(20080440979) |
| 语种 | 中文 ; 中文 |
| 内容类型 | 期刊论文 |
| 源URL | [http://hdl.handle.net/123456789/59985]  |
| 专题 | 清华大学 |
| 推荐引用方式 GB/T 7714 | 郑丹,李文伟,ZHENG Dan,等. 预测全级配大坝混凝土弹性模量的三相模型[J],2010, 2010. |
| APA | 郑丹,李文伟,ZHENG Dan,&LI Wen-wei.(2010).预测全级配大坝混凝土弹性模量的三相模型.. |
| MLA | 郑丹,et al."预测全级配大坝混凝土弹性模量的三相模型".(2010). |
| 个性服务 |
| 查看访问统计 |
| 相关权益政策 |
| 暂无数据 |
| 收藏/分享 |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论