CORC  > 清华大学
具有斜拉梁的串联接触式射频微机电系统开关
侯智昊 ; 刘泽文 ; 胡光伟 ; 刘理天 ; 李志坚 ; HOU Zhihao ; LIU Zewen ; HU Guangwei ; LIU Litian ; LI Zhijian
2010-06-09 ; 2010-06-09
关键词射频微机电系统开关 串联接触 斜拉梁 残余应力 radio frequency(RF) micro electromechanical system(MEMS) switch DC-contact series slanting beam residue stress TP211.4
其他题名DC-contact series radio-frequency micro electromechanical system switch with slanting beams
中文摘要为解决悬臂梁结构的射频微机电系统开关在残余应力的作用下会发生翘曲的问题,提出在悬臂梁的顶端引入斜拉梁的方法。使用Al/Au复合桥膜作为射频微机电系统开关的上电极,实现了Au-Au接触,利用BorofloatTM玻璃作为衬底,使用电阻对导通状态下的射频信号与驱动电极旁路进行隔离,使它的射频性能不受驱动电压的影响。测试表明:隔离度在12 GHz的频率下,插入损耗和隔离度分别为-0.29 dB和-20 dB。该射频微机电系统开关适合于DC-X波段的应用。; A DC-contact series radio frequency(RF) micro electromechanical system(MEMS) switch with slanting beams was developed to eliminate warping of the cantilever beam due to residue stresses.An Al/Au membrane was used as the upper electrode to provide direct Au-Au contact.The radio frequency MEMS switch was fabricated on a BorofloatTM glass substrate with the natural electrical resistance used to isolate the radio-frequency signal and the bias voltage which gives the MEMS switch a low insertion loss.Tests show that the insertion loss is-0.29 dB and the isolation is-20 dB at 12 GHz respectively.Thus this switch is suitable for applications having frequencies from DC to the X band.; 北京市科委项目(GYYKW05070014); 国家创新基金支持项目(06c26213100944)
语种中文 ; 中文
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/56968]  
专题清华大学
推荐引用方式
GB/T 7714
侯智昊,刘泽文,胡光伟,等. 具有斜拉梁的串联接触式射频微机电系统开关[J],2010, 2010.
APA 侯智昊.,刘泽文.,胡光伟.,刘理天.,李志坚.,...&LI Zhijian.(2010).具有斜拉梁的串联接触式射频微机电系统开关..
MLA 侯智昊,et al."具有斜拉梁的串联接触式射频微机电系统开关".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace