CORC  > 清华大学
发汗冷却过程中多孔壁面内的局部非热平衡分析
于淼 ; 姜培学 ; YU Miao ; JIANG Pei-Xue
2010-06-08 ; 2010-06-08
关键词发汗冷却 多孔介质 局部非热平衡模型 数值模拟 transpiration cooling porous media local thermal non-equilibrium numerical simulation TK123
其他题名INVESTIGATION OF THERMAL NON-EQUILIBRIUM IN POROUS WALL WITH TRANSPIRATION COOLING
中文摘要本文采用局部非热平衡模型对发汗冷却过程中多孔壁面内的换热和流动进行了数值模拟,分析了影响多孔介质内固体骨架与流体的温度及温差分布的因素,研究了这些因素对发汗冷却过程的影响规律.计算结果表明:增大固体骨架的导热系数、增大冷却剂流速或者加强冷端换热有利于提高发汗冷却效率.; Convection heat transfer in porous wall with transpiration cooling was investigated nu- merically using Local Thermal Non-Equilibrium Model.The factors influencing the solid and fluid temperatures and the temperature difference between the solid and fluid phases in porous wall were analyzed,and the effects of these factors on transpiration cooling were investigated.The results showed that increasing solid thermal conductivity and coolant mass flow rate and convection heat transfer in the inlet of coolant can improve the performance of transpiration cooling.; 清华大学基础研究基金(No.JCpy2005049)资助
语种中文 ; 中文
内容类型期刊论文
源URL[http://hdl.handle.net/123456789/51004]  
专题清华大学
推荐引用方式
GB/T 7714
于淼,姜培学,YU Miao,等. 发汗冷却过程中多孔壁面内的局部非热平衡分析[J],2010, 2010.
APA 于淼,姜培学,YU Miao,&JIANG Pei-Xue.(2010).发汗冷却过程中多孔壁面内的局部非热平衡分析..
MLA 于淼,et al."发汗冷却过程中多孔壁面内的局部非热平衡分析".(2010).
个性服务
查看访问统计
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。


©版权所有 ©2017 CSpace - Powered by CSpace